Welcome, Guest
Login
Register
Search
Home
Forum
Help
Site Rules
Advertise
Login
Register
Menu
Home
Forum
Help
Site Rules
Advertise
Login
Register
Classic AquaSport
/
Aquasport Model Rebuilds, Mods, Updates and Refreshes
/
Osprey Style Hull Rebuilds
/
22-2 Rebuilds
/
1976 22-2 rebuild, factory inboard to outboard conversion
Attention: Have only 1 page to see today
« previous
next »
Print
Pages:
1
...
10
11
12
13
14
15
Go Down
Author
Topic: 1976 22-2 rebuild, factory inboard to outboard conversion (Read 14055 times)
September 10, 2020, 03:49:08 PM
Reply #165
theFunsmith
Information
Posts:
265
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #165 on:
September 10, 2020, 03:49:08 PM »
Well gents, I got the third coat down shortly after my last post. She looked really good from a distance, but up close, I just wasn't happy with it. I was getting lots of airborn particles and a few runs. I made the decision to have a pro shoot the last coat in a proper booth. She is going in Monday. Been a heck of a week this week otherwise , we may not have hurricanes here, but its not all beer and skittles. Half the state is on fire, and it was closing in on the shop I was working in, so I went to grab the boat. No sense in risking it. The darker photos were midday here in Salem. We are about 25 miles away from the Santiam fire's current front. Several friends have lost houses, but everyone I know has been safely evacuated so far. For now, we are hoping the wind blows the fires back into no-mans-land and away from civilization and trying not to breathe too much of this crap. It is raining ash on everything. It looks like it is snowing at moments.
Rick, As for the cars on the shop wall, I thought I would grab a couple pics while i was out there. In one car, we have Cheech and Chong, enjoying the view, in the other car there are a couple mannequins showing off their bits.
Logged
September 10, 2020, 05:45:18 PM
Reply #166
Capt. Bob
Information
Global Moderator
Posts:
6445
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #166 on:
September 10, 2020, 05:45:18 PM »
That just sucks.
I can only relate ( and it seems like a 100 years ago) to what we experienced when I was young growing up in South Dade Florida and we had Everglades fires. The night sky looked like that. Difference here was it was just prairie land burning and not peoples homes. Smoke and ash but no evacs or burned out neighborhoods.
Good luck and stay safe.
PS. nice TaTa's.
Logged
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"
September 10, 2020, 06:47:29 PM
Reply #167
Fishhead
Information
Posts:
147
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #167 on:
September 10, 2020, 06:47:29 PM »
Stay safe, we have some family that lost a house yesterday in Phoenix OR Crazy stuff down here also been raining ash for last week from fires more than 70 miles away and more started north
Logged
19-6 family fisherman
24 osprey pilothouse
22-2 family fisherman
September 11, 2020, 11:22:48 AM
Reply #168
Tampa Bay Mike
Information
Master Rebuilder
Posts:
579
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #168 on:
September 11, 2020, 11:22:48 AM »
Wow, glad you are safe! Hope it doesn't get any closer to you. It's about the complete opposite down here on the west coast of Florida. Still hot as can be and it has been raining like crazy every afternoon.
Logged
September 11, 2020, 05:14:41 PM
Reply #169
RickK
Information
Administrator
Posts:
11278
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #169 on:
September 11, 2020, 05:14:41 PM »
Stay safe. I like the occupants of those cars - novel display, thanks for the new pics
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)
1992 230 Explorer with 250 Yamaha
September 16, 2020, 03:48:58 PM
Reply #170
theFunsmith
Information
Posts:
265
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #170 on:
September 16, 2020, 03:48:58 PM »
The fires out here appear to be more or less under control, and the smoke is clearing, kind of. I think I saw the sun for a moment yesterday. I got the boat back from the painting pros this morning and I couldn't be more pleased. As much as I like doing the work that I can on her, sometimes it just makes sense to let a professional handle a job. I plan on letting the paint harden up for the rest of the week before attempting the flip back upright. Hopefully this time next week I will be installing and fairing/painting the console, livewell helm seat, and fish box as well as fairing the other surfaces in preparation for linex. I may have to take a week or so off work to try to hammer it out while the weather allows. One step closer.
Logged
September 16, 2020, 06:50:53 PM
Reply #171
RickK
Information
Administrator
Posts:
11278
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #171 on:
September 16, 2020, 06:50:53 PM »
Looks good
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)
1992 230 Explorer with 250 Yamaha
September 17, 2020, 07:13:37 AM
Reply #172
Capt. Bob
Information
Global Moderator
Posts:
6445
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #172 on:
September 17, 2020, 07:13:37 AM »
Ah, the crane returns.
Logged
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"
September 22, 2020, 04:24:57 PM
Reply #173
theFunsmith
Information
Posts:
265
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #173 on:
September 22, 2020, 04:24:57 PM »
We got her flipped and home safe and sound, got the trailer adjusted well, and she is looking pretty damn good. Going to hit it hard this weekend. I plan on calling in some favors and getting some help to get a pile of fairing done on the inside and get the console glassed into place. It is a race against the weather at this point.
Logged
September 22, 2020, 04:41:02 PM
Reply #174
RickK
Information
Administrator
Posts:
11278
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #174 on:
September 22, 2020, 04:41:02 PM »
The reflection of the fenders in the paint is an advertisement in itself.
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)
1992 230 Explorer with 250 Yamaha
September 23, 2020, 08:52:51 AM
Reply #175
Capt. Bob
Information
Global Moderator
Posts:
6445
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #175 on:
September 23, 2020, 08:52:51 AM »
Excellent!
Logged
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"
September 23, 2020, 08:35:43 PM
Reply #176
Tampa Bay Mike
Information
Master Rebuilder
Posts:
579
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #176 on:
September 23, 2020, 08:35:43 PM »
Looking great 👍
Logged
October 05, 2020, 01:27:25 AM
Reply #177
theFunsmith
Information
Posts:
265
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #177 on:
October 05, 2020, 01:27:25 AM »
This last week, I played hooky from work and got after it pretty hard. I had some help available and took full advantage of it. I got the console glassed down and then it was a whole week of filling, fairing and repeating. I made a little mandrel to put adhesive backed sandpaper on, for the purpose of countersinking the factory fish box drain location for a proper stainless drain fitting and put it to use. And as of about an hour ago, I buttoned up priming the fish box, and final painting of the bilge, the inside of the console, and storage areas.
Logged
October 05, 2020, 06:56:55 AM
Reply #178
RickK
Information
Administrator
Posts:
11278
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #178 on:
October 05, 2020, 06:56:55 AM »
Lots of progress - looking good.
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)
1992 230 Explorer with 250 Yamaha
October 05, 2020, 12:28:05 PM
Reply #179
Ulysses485
Information
Posts:
344
Re: 1976 22-2 rebuild, factory inboard to outboard conversion
«
Reply #179 on:
October 05, 2020, 12:28:05 PM »
Glad to hear everyone is safe and your back at it. Boat is coming along nicely and looking really good! Your work looks great! Couple of questions:
1. Is there any concern with the access hatch to be located in the center console? I assume you will have the batteries there as well? I want to do the same to eliminate deck water from constantly being in contact with the access cover seal.
2. Is the front seat going to be a cooler or livewell or both? I see a drain plug in the bottom. Is that drained to a through hull at the transom or bilge?
3. Is that the original console that has been modified with the floor flanges cut off? Thank You
Ulysses
Logged
1974' 240 CC -
https://classicaquasport.com/smf/index.php?topic=15975.0
1970’ Flatback 222 -
https://classicaquasport.com/smf/index.php?topic=15666.0
1981’ Osprey 22-2 -
https://classicaquasport.com/smf/index.php?topic=15249.0
1971’ Flatback 222 - SOLD
1972' 240 Seahunter - SOLD
Print
Pages:
1
...
10
11
12
13
14
15
Go Up
« previous
next »
Classic AquaSport
/
Aquasport Model Rebuilds, Mods, Updates and Refreshes
/
Osprey Style Hull Rebuilds
/
22-2 Rebuilds
/
1976 22-2 rebuild, factory inboard to outboard conversion
SimplePortal 2.3.5 © 2008-2012, SimplePortal