You reached the limit of pages to see for today

Author Topic: RickK's 170 rebuild  (Read 74503 times)

February 28, 2015, 07:12:48 PM
Reply #900

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: RickK's 170 rebuild
« Reply #900 on: February 28, 2015, 07:12:48 PM »
"got 'er done"  :dancing:
Glued the bottom of the original storage compartment to the sole with thickened epoxy I troweled on.  Added some weight and let it sit for a few hours.


I then mixed up some thickened resin, layed a fillet all the way around, let it kick a bit and then lam'd 2 x 1208 everywhere








Everything lam'd back together finally - just a little different configuration from 2 years ago :coolth:


 :weehee:

A little bit of prep grinding and then it's time to flip this baby and spend a little time on the bottom, sides and transom.
Another check on the list  8)
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

February 28, 2015, 09:14:47 PM
Reply #901

CLM65

  • Information Offline
  • Posts: 1394
Re: RickK's 170 rebuild
« Reply #901 on: February 28, 2015, 09:14:47 PM »
Looks great!
Craig

2002 205 Osprey, 200 HP Yamaha OX66


1967 22-2 Flatback (Rebuild in progress)

March 01, 2015, 04:11:58 AM
Reply #902

larsli68

  • Information Offline
  • Master Rebuilder
  • Posts: 530
Re: RickK's 170 rebuild
« Reply #902 on: March 01, 2015, 04:11:58 AM »
Very impressive!  :salut2:
Great work Rick!

//Lars

March 01, 2015, 07:11:04 AM
Reply #903

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: RickK's 170 rebuild
« Reply #903 on: March 01, 2015, 07:11:04 AM »
Thanks guys - I still have quite a ways to go though.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

March 01, 2015, 08:01:17 PM
Reply #904

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: RickK's 170 rebuild
« Reply #904 on: March 01, 2015, 08:01:17 PM »
Did the last big grind of the inside  :cheers:
And then did a little added CSM where needed


Drilled and installed the lifting eyes and also added a bunch of csm to build up the transom and tie it into the liner I made.  Have a few more layers to go.




It has been in the 70s here and I'm already seeing wasps so I am closing off any openings for the time she is upside down


I covered the rectangular hole in the liner after the pic.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

March 04, 2015, 12:10:33 PM
Reply #905

larsli68

  • Information Offline
  • Master Rebuilder
  • Posts: 530
Re: RickK's 170 rebuild
« Reply #905 on: March 04, 2015, 12:10:33 PM »
Looks great Rick!
No wasps here yet, but they are calling for temps in the low 50's on Sunday!
I can't wait. We got 1.5 inches of wet snow yesterday... and then it froze over night.
It is almost gone now, but it makes working on the boat a drag. I hope to do quite a bit this weekend.
Impressive build you are doing!
If I could find a job I would move to Florida...  ;-)

//Lars

March 04, 2015, 03:43:41 PM
Reply #906

CLM65

  • Information Offline
  • Posts: 1394
Re: RickK's 170 rebuild
« Reply #906 on: March 04, 2015, 03:43:41 PM »
Plenty of boatbuilders here in Florida, Lars!  You would fit right in!

Looking good Rick.  Did you find someone to flip the boat yet?
Craig

2002 205 Osprey, 200 HP Yamaha OX66


1967 22-2 Flatback (Rebuild in progress)

March 04, 2015, 06:50:30 PM
Reply #907

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: RickK's 170 rebuild
« Reply #907 on: March 04, 2015, 06:50:30 PM »
Hi Lars, I see a few wasps flying around here already  :roll:  It's in the 80s here this week.

Craig, I'm going to try it myself this weekend, fingers and cables crossed  ::p:
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

March 05, 2015, 02:00:46 PM
Reply #908

larsli68

  • Information Offline
  • Master Rebuilder
  • Posts: 530
Re: RickK's 170 rebuild
« Reply #908 on: March 05, 2015, 02:00:46 PM »
It's finally warming up here. They are calling for mid 50's here this weekend! :06:
It's boat building time!
The snow is gone. I can't say I miss it...

March 05, 2015, 06:25:21 PM
Reply #909

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: RickK's 170 rebuild
« Reply #909 on: March 05, 2015, 06:25:21 PM »
 :cool2:
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

March 05, 2015, 06:49:48 PM
Reply #910

dirtwheelsfl

  • Information Offline
  • Master Rebuilder
  • Posts: 808
Re: RickK's 170 rebuild
« Reply #910 on: March 05, 2015, 06:49:48 PM »
 :16:

If I could find a job I would move to Florida...  ;-)

//Lars


Bring some wimmen with ya!   :13:


March 05, 2015, 08:09:23 PM
Reply #911

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6446
Re: RickK's 170 rebuild
« Reply #911 on: March 05, 2015, 08:09:23 PM »
:16:

If I could find a job I would move to Florida...  ;-)

//Lars


Bring some wimmen with ya!   :13:

Any redheads in Sweden :ScrChin:
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

March 05, 2015, 08:15:54 PM
Reply #912

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: RickK's 170 rebuild
« Reply #912 on: March 05, 2015, 08:15:54 PM »
I used to have red hair :thumleft:

Actually I used to have hair  :pale:
Oh well, life is life, take the good with the bad and wear a hat :wink:   Life is ok again. :cheers:
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

March 05, 2015, 09:57:24 PM
Reply #913

CLM65

  • Information Offline
  • Posts: 1394
Re: RickK's 170 rebuild
« Reply #913 on: March 05, 2015, 09:57:24 PM »
I don't think you are the type of redhead CB was talking about, Rick.
Craig

2002 205 Osprey, 200 HP Yamaha OX66


1967 22-2 Flatback (Rebuild in progress)

March 06, 2015, 05:09:29 AM
Reply #914

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: RickK's 170 rebuild
« Reply #914 on: March 06, 2015, 05:09:29 AM »
I don't think you are the type of redhead CB was talking about, Rick.
I hope not  :lolG:
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal