Attention: Have 2 pages to see today

Author Topic: RickK's 170 rebuild  (Read 74436 times)

November 09, 2014, 03:07:07 PM
Reply #810

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: RickK's 170 rebuild
« Reply #810 on: November 09, 2014, 03:07:07 PM »
Dry fitting the cabinets - Starboard side:


I'll trim off the excess liner in the back when I take the liner out soon but you get the idea of the form and function.


Port side:


I then glued the "liner" I made for the front of the transom to the transom capping I made a few weeks ago.
Then it was time to glass it all together




I think I've found a new avatar  :mrgreen:


I let everything harden and then took it out of the boat






I put it back into the boat and called it a day - another step forward.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

November 09, 2014, 03:11:41 PM
Reply #811

wingtime

  • Information Offline
  • Posts: 3581
    • http://50newtmotorclub.shutterfly.com/
Re: RickK's 170 rebuild
« Reply #811 on: November 09, 2014, 03:11:41 PM »
Hey I like that. Good form and function! The ransom liner threw me off when you took it out. Cool idea.
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90

November 09, 2014, 05:49:10 PM
Reply #812

CLM65

  • Information Offline
  • Posts: 1394
Re: RickK's 170 rebuild
« Reply #812 on: November 09, 2014, 05:49:10 PM »
Looking great, Rick.  I gotta admit I wasn't sure where they were going to go when I saw your previous pics, but it is coming together nicely :salut:
Craig

2002 205 Osprey, 200 HP Yamaha OX66


1967 22-2 Flatback (Rebuild in progress)

November 09, 2014, 06:32:51 PM
Reply #813

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: RickK's 170 rebuild
« Reply #813 on: November 09, 2014, 06:32:51 PM »
Thanks guys, I need to remember to pre-drill the hinge holes for the doors before I glue this big piece to the liner and sole otherwise it will be a little challenging to do so.
I need to lam some 24oz woven to the front of the transom liner to beef it up and then I'll lam some 6oz veil cloth over that to smooth it out.  I'll get that tomorrow and lam it on Tuesday.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

November 09, 2014, 07:21:15 PM
Reply #814

kaptainkoz

  • Information Offline
  • Posts: 567
Re: RickK's 170 rebuild
« Reply #814 on: November 09, 2014, 07:21:15 PM »
Looks awesome. Great Ingenuity
1979 246 CCP project boat forever in development, Chesapeake Bay Virginia
Steven Koz<a href=\"mailto:Captainkoz@aol.com\"
[img]http://i457.photobuc

November 09, 2014, 08:22:49 PM
Reply #815

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6445
Re: RickK's 170 rebuild
« Reply #815 on: November 09, 2014, 08:22:49 PM »
Are you going to trim the existing cap liner to match the new side panel opening?
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

November 10, 2014, 04:52:53 AM
Reply #816

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: RickK's 170 rebuild
« Reply #816 on: November 10, 2014, 04:52:53 AM »
Quote from: "Capt. Bob"
Are you going to trim the existing cap liner to match the new side panel opening?
Kinda, I'm going to trim them a little longer than the front edge of the cabinets.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

November 10, 2014, 06:55:13 AM
Reply #817

larsli68

  • Information Offline
  • Master Rebuilder
  • Posts: 530
Re: RickK's 170 rebuild
« Reply #817 on: November 10, 2014, 06:55:13 AM »
Great design and craftsman ship Rick. Hopefully I'm driving to the cost here in NC on Wednesday. I hope to see some Aquasport boats.
Lars

November 17, 2014, 07:08:27 PM
Reply #818

chris m

  • Information Offline
  • Posts: 1
Re: RickK's 170 rebuild
« Reply #818 on: November 17, 2014, 07:08:27 PM »
Yikes! Great job. I have some of the same photos, but I'm not this far down the path. I salute you.

chris m

November 18, 2014, 05:02:42 AM
Reply #819

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: RickK's 170 rebuild
« Reply #819 on: November 18, 2014, 05:02:42 AM »
Thanks Chris - start your rebuild thread and show us what you've done so far.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

November 18, 2014, 09:16:13 AM
Reply #820

dburr

  • Information Offline
  • Posts: 890
Re: RickK's 170 rebuild
« Reply #820 on: November 18, 2014, 09:16:13 AM »
Rick have you used that cool vacuum pump yet on the project?
Dave

88 222 Osprey
00 Yamaha OX66 150
CAS # 2590

November 18, 2014, 12:31:48 PM
Reply #821

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6445
Re: RickK's 170 rebuild
« Reply #821 on: November 18, 2014, 12:31:48 PM »
Quote from: dburr
Rick have you used that cool vacuum pump yet on the project?

http://classicaquasport.com/smf/index.php?topic=10101.550
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

November 18, 2014, 09:53:06 PM
Reply #822

dburr

  • Information Offline
  • Posts: 890
Re: RickK's 170 rebuild
« Reply #822 on: November 18, 2014, 09:53:06 PM »
So I gather Schwartzbier is not good for reading comprehension..... Maybe the Doc said riddeli, I don't remember.... :roll:  :mrgreen:
Dave

88 222 Osprey
00 Yamaha OX66 150
CAS # 2590

November 19, 2014, 08:23:21 AM
Reply #823

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6445
Re: RickK's 170 rebuild
« Reply #823 on: November 19, 2014, 08:23:21 AM »
Quote from: "dburr"
I don't remember....

Hell, that was almost a year ago. I doubt most readers even remember he bought a pump, much less he used it.  :scratch:

And who said booze was bad for the brain?  :drunken:
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

November 19, 2014, 02:08:23 PM
Reply #824

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: RickK's 170 rebuild
« Reply #824 on: November 19, 2014, 02:08:23 PM »
What pump  :?:   Did I buy a pump  :scratch:


 :mrgreen:
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal