You reached the limit of pages to see for today

Author Topic: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefner  (Read 19258 times)

February 27, 2013, 11:36:57 PM
Reply #150

gman 82 aquasport

  • Information Offline
  • Master Rebuilder
  • Posts: 594
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #150 on: February 27, 2013, 11:36:57 PM »
Coming along very nicely, hull looks great :salut:
1982 19-6 Osprey
1992 Johnson 150
"THERAPY"
Member # 2331

February 28, 2013, 09:04:48 AM
Reply #151

Skoot

  • Information Offline
  • Posts: 484
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #151 on: February 28, 2013, 09:04:48 AM »
Wow, she is looking really good.  Im curious, why gel on the bottom/transom and Paint on the sides?
Scott

1975 19-6 - 90hp Tohatsu

February 28, 2013, 05:14:57 PM
Reply #152

ashley

  • Information Offline
  • Posts: 79
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #152 on: February 28, 2013, 05:14:57 PM »
Quote from: "Skoot"
Wow, she is looking really good.  Im curious, why gel on the bottom/transom and Paint on the sides?

Hey, thanks. The bottom has gel coat for durability, pulling up to beaches, oyster etc. The sides are paint just cause that is what we agreed to for cost reasons. I didn't know he was going to gel the transom but I 'm cool with it.

Here is the diver door (which has gel coat for some reason) being put in. Looks great Eugene!

 

February 28, 2013, 06:52:53 PM
Reply #153

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #153 on: February 28, 2013, 06:52:53 PM »
Ashley, she is looking great....that door is THE HEAT :mrgreen:  :thumright:

February 28, 2013, 07:09:36 PM
Reply #154

ashley

  • Information Offline
  • Posts: 79
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #154 on: February 28, 2013, 07:09:36 PM »
Quote from: "gran398"
Ashley, she is looking great....that door is THE HEAT :mrgreen:  :thumright:

Thanks, heading down in a week to figure out console etc.


February 28, 2013, 08:16:44 PM
Reply #155

ashley

  • Information Offline
  • Posts: 79
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #155 on: February 28, 2013, 08:16:44 PM »
Just checked my email and found these. They decided to paint today. Its a light grey and the bottom/ transom is a bright white.






February 28, 2013, 08:36:08 PM
Reply #156

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #156 on: February 28, 2013, 08:36:08 PM »
Sweet :salut:

Looking back....this is a FUN part of the rebuild :thumright:

February 28, 2013, 09:54:39 PM
Reply #157

CLM65

  • Information Offline
  • Posts: 1394
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #157 on: February 28, 2013, 09:54:39 PM »
Looking great, Ashley!  Is the diver door white like the bottom or light grey like the sides?
Craig

2002 205 Osprey, 200 HP Yamaha OX66


1967 22-2 Flatback (Rebuild in progress)

February 28, 2013, 10:09:58 PM
Reply #158

Group W Bench

  • Information Offline
  • Posts: 271
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #158 on: February 28, 2013, 10:09:58 PM »
The dive door is painted in grey to match the topsides. The inside of the door will have the same nonskid as the deck for sure footing when climbing in/out. I'm really excited about the redesign of the hinging and opening/closing mechanism. It should prove to be a lot more functional and less fugly than the original design.

February 28, 2013, 10:16:05 PM
Reply #159

Group W Bench

  • Information Offline
  • Posts: 271
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #159 on: February 28, 2013, 10:16:05 PM »
Here is the diver door (which has gel coat for some reason) being put in. Looks great Eugene!

 [/quote]


It is actually the APF 7 fairing compound. Ashley, you are used to seeing the fairing material after it has been blue dyed in all the pictures but this one. This dive door has already been faired so the blue dye is no longer visible.

February 28, 2013, 11:23:38 PM
Reply #160

ashley

  • Information Offline
  • Posts: 79
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #160 on: February 28, 2013, 11:23:38 PM »
Quote from: "Group W Bench"
Here is the diver door (which has gel coat for some reason) being put in. Looks great Eugene!

 


It is actually the APF 7 fairing compound. Ashley, you are used to seeing the fairing material after it has been blue dyed in all the pictures but this one. This dive door has already been faired so the blue dye is no longer visible.[/quote]

Yeah that was my 2nd guess, APF 7  :D

March 01, 2013, 08:35:59 AM
Reply #161

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6449
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #161 on: March 01, 2013, 08:35:59 AM »
Quote from: "Group W Bench"
The dive door is painted in grey to match the topsides. The inside of the door will have the same nonskid as the deck for sure footing when climbing in/out. I'm really excited about the redesign of the hinging and opening/closing mechanism. It should prove to be a lot more functional and less fugly than the original design.

Went back through the thread so....
We haven't seen the hinge assembly yet correct? This is what I'm waiting for because the side platform was a big deal in those days.
A rope would be an upgrade so post up when the mechanism gets installed. :thumright:

"Fugly" is being rather PC to say the least. :roll:
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

March 01, 2013, 11:04:00 AM
Reply #162

ashley

  • Information Offline
  • Posts: 79
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #162 on: March 01, 2013, 11:04:00 AM »

March 01, 2013, 02:19:39 PM
Reply #163

ashley

  • Information Offline
  • Posts: 79
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #163 on: March 01, 2013, 02:19:39 PM »

March 01, 2013, 09:15:51 PM
Reply #164

Skoot

  • Information Offline
  • Posts: 484
Re: 1968 Aquasport Flatback Diver - Shipoke Rebuild for Hefn
« Reply #164 on: March 01, 2013, 09:15:51 PM »
I know your getting really stoked now, That paint looks perfect.  You picked an excellent builder and Im sure you'll be happy for many years to come.

So when you come back into town to pick her up, are you gonna stick around and run her in the gulf for a bit?
Scott

1975 19-6 - 90hp Tohatsu

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal