Menu

Attention: Have 2 pages to see today
« previous next »
Pages: 1   Go Down

Author Topic: Weight of a 170?  (Read 2899 times)

March 17, 2006, 03:20:19 PM
Read 2899 times

Mr. Osprey

  • Information Offline
  • Posts: 113
Weight of a 170?
« on: March 17, 2006, 03:20:19 PM »
I know the 80's weigh around 1150 but does anyone know what the older ones weigh? If not the exact weight, is it lighter, heavier, or about the same weight as an 80's hull?
Logged
Mr. Osprey

1971 Mako 17 Angler
1986 Evinrude 88 SPL
March 17, 2006, 07:36:37 PM
Reply #1

Kaczki

  • Information Offline
  • Posts: 91
(No subject)
« Reply #1 on: March 17, 2006, 07:36:37 PM »
Lighter, around 900 lbs.
Logged
1971 19-1
They don\'t build \'em like they used to.
March 17, 2006, 10:07:50 PM
Reply #2

JimCt

  • Information Offline
  • Posts: 1848
(No subject)
« Reply #2 on: March 17, 2006, 10:07:50 PM »
From circa. 1971 brochure.  See bottom of page:

Logged
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22
March 18, 2006, 07:01:39 AM
Reply #3

Kaczki

  • Information Offline
  • Posts: 91
(No subject)
« Reply #3 on: March 18, 2006, 07:01:39 AM »
Jim, you sent me a brochure from 1971 that has the 17 listed as 950 lbs.  That brochure must be older than the one you just posted.
Logged
1971 19-1
They don\'t build \'em like they used to.
March 18, 2006, 11:34:50 AM
Reply #4

JimCt

  • Information Offline
  • Posts: 1848
(No subject)
« Reply #4 on: March 18, 2006, 11:34:50 AM »
Hmmmmm.... I see that...

I'm wondereing now if one weight was with the engine, the other without.  200 lbs is a big difference with such a small boat.  At any rate, that's all the info. I've got here.
Logged
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22
March 19, 2006, 06:57:47 AM
Reply #5

RickK

  • *****
  • Information Online
  • Administrator
  • Posts: 11272
(No subject)
« Reply #5 on: March 19, 2006, 06:57:47 AM »
That brochure is for a later year?  The forward casting deck and console is different.  Mine also doesn't have the fuel fill/vent on the side of the boat. Something fishy's going on here :wink:. (Does show a good shot of the bow locker cover that someone was asking about - although it doesn't seem to show a bottom latch)
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha
March 19, 2006, 01:42:31 PM
Reply #6

JimCt

  • Information Offline
  • Posts: 1848
(No subject)
« Reply #6 on: March 19, 2006, 01:42:31 PM »
Problem with most of the literature I have is that Aquasport didn't date most of their sales brochures or specs.  Likely they didn't want the production costs of re-issuing each year.  That's why the "circa" dates.  I agree with you regarding the fwd. locker & fuel fill config.  My feeling is that various changes were made on-the-fly and without any "model year" consideration.

 For example, the fuel fill location may have been changed from the console (like my 170) to the rail area, as shown in the brochure because of a change in a CG safety reg.  The CG reg. gets issued and by the next week all production is changed over to comply.  Just a guess, but that's the impression I have.  RickK and I have kicked this around some regarding our 170's because both our boats are pre Nov. '72 (no HIN's) but the liners are different in several respects.

So, what does a 170 weigh?  Somewhere between 900 and 1150 lbs.
Logged
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22
March 19, 2006, 01:52:56 PM
Reply #7

Deck Daddy

  • Information Offline
  • Posts: 74
(No subject)
« Reply #7 on: March 19, 2006, 01:52:56 PM »
Thats where the fill is located on my boat and its a 1973. Console is exactly like mine also, those green seats were original on my boat when I baught it.
Logged
One boat at a time.
Pages: 1   Go Up
« previous next »
 

SimplePortal 2.3.5 © 2008-2012, SimplePortal