Attention: Have only 1 page to see today

Author Topic: Hardtop part number  (Read 1882 times)

April 20, 2012, 09:45:29 PM
Reply #15

jdrago

  • Information Offline
  • Posts: 19
Re: Hardtop part number
« Reply #15 on: April 20, 2012, 09:45:29 PM »
Forgot to reply.  They responded with a big negative that they can't build them any more and the Welcraft ones are not the same.  Email below

Jim,
           Actually we built the frames for both models
The Wellcraft frame will not fit the Aquasport, in addition, since we have not built the Aquasport frame since 2005, we no longer have the fixtures to do the part.
I am sorry but we will not be able to help you.
Sincerely,
Bill Becker
GG Schmitt & Sons
Sarasota, Florida


Jim  :afro:

April 20, 2012, 10:04:54 PM
Reply #16

pete

  • Information Offline
  • Posts: 1420
Re: Hardtop part number
« Reply #16 on: April 20, 2012, 10:04:54 PM »
your best bet is to go to a local alum fabricator and get one made.I would go to several shops and get estimates.you can even email pics of your boat to them to get a rough idea of the cost.the prices may vary greatly,shop around,and ask locals for recomendations of good shops,good luck. :salut:
2003  Osprey 225
Palm Bay FL

April 20, 2012, 11:54:48 PM
Reply #17

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Hardtop part number
« Reply #17 on: April 20, 2012, 11:54:48 PM »
Quote from: "jdrago"
Does any one know if the Wellcraft 232 hardtop will fit the Explorer 225?

thanks
Jim

Sorry I didn't see this earlier, Jim.  No, the 232 Coastal and the 225 Explorer are totally different...


Corner of 520 and A1A...

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal