Attention: Have 2 pages to see today

Author Topic: Question 22' or 24'  (Read 898 times)

December 06, 2011, 01:50:05 PM
Read 898 times

Flatback Man

  • Information Offline
  • Posts: 14
Question 22' or 24'
« on: December 06, 2011, 01:50:05 PM »
Has anyone ever rebuilt a 24' aquasport? Besides that it is 2' longer are there any other reasons to go from a 22' to a 24'? I literally just got my 222 and now am thinking about starting a 24. Does anyone think that is a bad idea and why?

December 06, 2011, 02:29:36 PM
Reply #1

Capt Matt

  • Information Offline
  • Master Rebuilder
  • Posts: 791
    • http://www.captmattmitchell.com
Re: Question 22' or 24'
« Reply #1 on: December 06, 2011, 02:29:36 PM »
Bigger boat, bigger power needed, bigger gas bill
Neither one is a offshore boat though a 24 should handle sea's a little better.

Is the 22 a flatback?
If not the 22-2 and 24 draw about the same about of water for bay fishing.

Capt Matt
www.captmattmitchell.com
Light tackle sportfishing

December 06, 2011, 02:36:30 PM
Reply #2

Flatback Man

  • Information Offline
  • Posts: 14
Re: Question 22' or 24'
« Reply #2 on: December 06, 2011, 02:36:30 PM »
Yes it is a closed transom and I would transfer my motor from my 222 to the 24. It's at 250 HO E-Tec. I know the v looks a bit deeper but is the beam any different?

December 06, 2011, 03:33:09 PM
Reply #3

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11269
Re: Question 22' or 24'
« Reply #3 on: December 06, 2011, 03:33:09 PM »
What model 24?
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

December 06, 2011, 07:47:54 PM
Reply #4

Capt Matt

  • Information Offline
  • Master Rebuilder
  • Posts: 791
    • http://www.captmattmitchell.com
Re: Question 22' or 24'
« Reply #4 on: December 06, 2011, 07:47:54 PM »
I'm not sure if there is a difference in the beam of the too hulls. The mid 70's hulls had less of a V than the 80's models. A 250 will push either one fine.
The flatback aquasports was the first aquasport made and only in production from 1967-71 "Flatback" refers to the deadrise of 0 degree's not a full transom. Think of how the bottom of a Carolina skiff looks and that is what a flatback looks like.  The zero deadrise gives it shallow draft and makes them very stable making them a great choice for a tower. Proline made a 24 flatback till the mid to late 80's
Capt Matt
www.captmattmitchell.com
Light tackle sportfishing

December 06, 2011, 08:27:35 PM
Reply #5

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Re: Question 22' or 24'
« Reply #5 on: December 06, 2011, 08:27:35 PM »
Quote from: "Flatback Man"
Yes it is a closed transom and I would transfer my motor from my 222 to the 24. It's at 250 HO E-Tec. I know the v looks a bit deeper but is the beam any different?

The 22 foot and 24 foot CCPs have same beam.  According to specs, the 24 footer draws 12" of water and the 22 footer draws 10" - The older Sea Hunter 24 footer is a different hull than the CCPs.
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209


December 06, 2011, 10:35:57 PM
Reply #6

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: Question 22' or 24'
« Reply #6 on: December 06, 2011, 10:35:57 PM »
Easy solution...what year is the 24?

Thanks.

December 07, 2011, 12:15:49 AM
Reply #7

slippery73

  • Information Offline
  • Master Rebuilder
  • Posts: 317
Re: Question 22' or 24'
« Reply #7 on: December 07, 2011, 12:15:49 AM »
I considered the same thing part way through my rebuild. Figured I could finish my 222 and sell it for the 24 seahunter rebuild... love that boat.  But, in all reality its still not a great offshore boat and an even worse inshore boat than the 222.  I'd say you lose more on the inshore side than you gain on the offshore ability. The 24 model has more beam, and more draft.  My plan is to finish my 222 and pickup a bertram 25 for an offshore rig.  If you can afford two boats I'd get a dedicated offshore boat and an inshore boat.

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal