Welcome, Guest
Login
Register
Search
Home
Forum
Help
Site Rules
Advertise
Login
Register
Menu
Home
Forum
Help
Site Rules
Advertise
Login
Register
Classic AquaSport
/
Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter
/
Plumbing
/
1978 Aquasport bilge pump
Attention: Have 2 pages to see today
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: 1978 Aquasport bilge pump (Read 647 times)
May 27, 2019, 04:07:04 PM
Read 647 times
pi4dom
Information
Posts:
5
1978 Aquasport bilge pump
«
on:
May 27, 2019, 04:07:04 PM »
1978 Aquasport 22 Feet Family Fishermen
I bought this boat about 2 months ago and it needed a lot of work.
I turned on the bilge pump and no water came out.
Today I removed the drain plug by the transom and about 100 gallons of water came out.
Does anybody know where the bilge pump is located?
Thanks
Logged
May 28, 2019, 03:37:16 PM
Reply #1
RickK
Information
Administrator
Posts:
11278
Re: 1978 Aquasport bilge pump
«
Reply #1 on:
May 28, 2019, 03:37:16 PM »
Yeah, obviously the pump is more than likely frozen. See if there is an access plate in the aft and also in the cabin. Where is the hose port in the side of the boat, where the water should come out?? Might be on the side of the hull in front of the helm. The catalog defines it as self bailing - my '71 170 was self bailing, meaning no bilge pump. I don't see an access plate on the drawing. My guess is in the cabin in the step down you'll find an access plate.
http://www.classicaquasport.com/gallery/showphoto.php?photo=2760&title=as-family-fisherman-series-broch-8-c1978&cat=582
We have plenty of members with FF so they'll be around soon.
Here is another catalog sheet - it shows a bilge pump in the very aft. The CCC in the sheet we think is a FF hull and cabin with a center console added. The 188 shows bilge access in the aft.
http://www.classicaquasport.com/gallery/showphoto.php?photo=2776&title=as-family-fisherman&cat=582
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)
1992 230 Explorer with 250 Yamaha
September 19, 2019, 08:42:06 AM
Reply #2
Capt.MattF
Information
Posts:
12
Re: 1978 Aquasport bilge pump
«
Reply #2 on:
September 19, 2019, 08:42:06 AM »
Pumps need replaced nice every 3 or 4 years Ive has numerous rule 1500 s 800s etc that last a season or longer than expected, yours is 109% done, retired
Logged
Captain Matthew Fruits
1970 Aquasport 22. 2 Center consul
1997 40’ ocean yacht SS “Tunacious”
September 19, 2019, 01:12:54 PM
Reply #3
dbiscayne
Information
Posts:
303
Re: 1978 Aquasport bilge pump
«
Reply #3 on:
September 19, 2019, 01:12:54 PM »
check the wiring too make sure you're getting power to the pump.
Logged
Print
Pages:
1
Go Up
« previous
next »
Classic AquaSport
/
Aquasport Mechanicals - things that need a wrench, screwdriver or multimeter
/
Plumbing
/
1978 Aquasport bilge pump
SimplePortal 2.3.5 © 2008-2012, SimplePortal