Menu

Attention: Have only 1 page to see today
« previous next »
Pages: 1 2   Go Down

Author Topic: 290 aquasport  (Read 3539 times)

August 30, 2012, 05:42:56 PM
Reply #15

joey4240

  • Information Offline
  • NorthEast
  • Posts: 8
Re: 290 aquasport
« Reply #15 on: August 30, 2012, 05:42:56 PM »
I have put over 300hours on her, bloodied up her deck with bass, blues and shark. I am happy with her so far. Fuel consumption is tough and speed is not what i had hoped for. I am running 17 X 17 three blades 5 cup on the 350 volvo pentas. At 3k im doing 14 mph. Does anyone have any suggestions how i can tweek some more speed out of it?
Logged
January 12, 2018, 04:14:34 PM
Reply #16

Jrpinoy

  • Information Offline
  • Posts: 28
Re: 290 aquasport
« Reply #16 on: January 12, 2018, 04:14:34 PM »
I have 350 crusaders 300hp 18x18 props I get 22mph at 3300rpm at cruise.  I have a tower as well   If your props turn in you get more thrust my 290 comes right up on plane with ease. She has 1200hrs on those motors
Logged
January 17, 2018, 04:14:28 AM
Reply #17

George290

  • Information Offline
  • Posts: 27
Re: 290 aquasport
« Reply #17 on: January 17, 2018, 04:14:28 AM »
I have the same boat, no tower with original crusaders 270hp.  I have 18x19 props and cruise 21mph @3250.  Seems like you need bigger wheels.
Logged
March 26, 2019, 08:00:52 PM
Reply #18

nyguideservice

  • Information Offline
  • Posts: 25
Re: 290 aquasport
« Reply #18 on: March 26, 2019, 08:00:52 PM »
I have the same boat, but has been repowered with Crusader 300hp,350’s.  I am running 4 blade wheels, up on plane at 2600-3000, depending on fuel load and passenger load. I cruise at 3100-3200 rpm at 21-24 mph. I love my ride, does not have the tower, but does have a lot of extra weight with Downriggers, and all my rods and reels. I have updated my carbs to Eldelbrocks, and also updated to new electronic ignition.

Capt Rich
Logged
Pages: 1 2   Go Up
« previous next »
 

SimplePortal 2.3.5 © 2008-2012, SimplePortal