Welcome, Guest
Login
Register
Search
Home
Forum
Help
Site Rules
Advertise
Login
Register
Menu
Home
Forum
Help
Site Rules
Advertise
Login
Register
Classic AquaSport
/
Aquasport Model Rebuilds, Mods, Updates and Refreshes
/
Osprey Style Hull Rebuilds
/
22-2 Rebuilds
/
1977 22 -2 rebuild
Attention: Have 2 pages to see today
« previous
next »
Print
Pages:
1
2
3
4
...
7
Go Down
Author
Topic: 1977 22 -2 rebuild (Read 6108 times)
June 19, 2015, 03:49:44 PM
Reply #15
northfork
Information
Posts:
129
Re: 1977 22 -2 rebuild
«
Reply #15 on:
June 19, 2015, 03:49:44 PM »
I am using 1708 with mat sewn in. I was just using the extra layer of mat between to help with the bond. It really smoooths over all small imperfections.
Thanks
Logged
June 19, 2015, 05:55:40 PM
Reply #16
CLM65
Information
Posts:
1394
Re: 1977 22 -2 rebuild
«
Reply #16 on:
June 19, 2015, 05:55:40 PM »
One of the tips Eugene Sun gave me was to always use a layer of mat between new 1708 and old/cured fiberglass, as it does improve the bond strength as north said. I'm not sure it's necessary between successive layers of 1708, especially if they are added wet-on-wet, but they can't hurt. Looking good, north!
Logged
Craig
2002 205 Osprey, 200 HP Yamaha OX66
1967 22-2 Flatback (Rebuild in progress)
June 19, 2015, 09:53:11 PM
Reply #17
Que Pasa
Information
NorthEast
Posts:
321
Re: 1977 22 -2 rebuild
«
Reply #17 on:
June 19, 2015, 09:53:11 PM »
Nice work North.
Logged
June 22, 2015, 10:21:30 AM
Reply #18
northfork
Information
Posts:
129
Re: 1977 22 -2 rebuild
«
Reply #18 on:
June 22, 2015, 10:21:30 AM »
The top edge of the skin cut.
Blue water bonded to skin
transom crown. I'm happy with the curve.
Logged
June 22, 2015, 10:55:31 AM
Reply #19
RickK
Information
Administrator
Posts:
11253
Re: 1977 22 -2 rebuild
«
Reply #19 on:
June 22, 2015, 10:55:31 AM »
Nice job
What does the Bluewater weigh? Looks beefy.
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)
1992 230 Explorer with 250 Yamaha
June 22, 2015, 10:57:00 AM
Reply #20
Que Pasa
Information
NorthEast
Posts:
321
Re: 1977 22 -2 rebuild
«
Reply #20 on:
June 22, 2015, 10:57:00 AM »
The skin cut looks super clean, how did you cut the radius.
Logged
June 22, 2015, 01:10:06 PM
Reply #21
northfork
Information
Posts:
129
Re: 1977 22 -2 rebuild
«
Reply #21 on:
June 22, 2015, 01:10:06 PM »
Rick
It is probably less than two sheets of 3/4" plywood. It is some cool stuff. Cuts nice and easy and seems super strong.
Chuck
Logged
June 22, 2015, 01:14:33 PM
Reply #22
northfork
Information
Posts:
129
Re: 1977 22 -2 rebuild
«
Reply #22 on:
June 22, 2015, 01:14:33 PM »
Que
The radius cut can easily be done with a circular saw. Mark a sharp line and take your time. That how I cut the 1 1/2" thick transom as well. It is not a tight radius.
I will let you know the ht of the crown tonight.
Chuck
Logged
June 22, 2015, 01:49:31 PM
Reply #23
Callyb
Information
MidWest
Posts:
536
Re: 1977 22 -2 rebuild
«
Reply #23 on:
June 22, 2015, 01:49:31 PM »
Looks great!
Mighty fine work Chuck.
Logged
Carl
___________________________
1966 22-2 Flatback w/diver door (perpetual rebuild) w/Mercury 150
1997 Osprey 245 w/Twin 150 Evinrudes
June 22, 2015, 09:41:07 PM
Reply #24
northfork
Information
Posts:
129
Re: 1977 22 -2 rebuild
«
Reply #24 on:
June 22, 2015, 09:41:07 PM »
Thanks Carl
I am figuring things out as I go. Any suggestions are more then welcome.
Logged
June 23, 2015, 10:41:47 AM
Reply #25
northfork
Information
Posts:
129
Re: 1977 22 -2 rebuild
«
Reply #25 on:
June 23, 2015, 10:41:47 AM »
Took all the bolts and bracing off last night. The transom feels so solid with the Coosa even without knees. That stuff is really cool.
Logged
June 23, 2015, 05:41:54 PM
Reply #26
northfork
Information
Posts:
129
Re: 1977 22 -2 rebuild
«
Reply #26 on:
June 23, 2015, 05:41:54 PM »
time to clean the shop
Logged
June 25, 2015, 11:14:51 AM
Reply #27
northfork
Information
Posts:
129
Re: 1977 22 -2 rebuild
«
Reply #27 on:
June 25, 2015, 11:14:51 AM »
fillets done. a little sanding then some glass on the transom.
Logged
June 25, 2015, 11:51:33 AM
Reply #28
RickK
Information
Administrator
Posts:
11253
Re: 1977 22 -2 rebuild
«
Reply #28 on:
June 25, 2015, 11:51:33 AM »
Looks good.
Going forward, if you can work it out where you spread the fillets, let them start to cure enough that you won't push them out of place but they're still "green", then lay your tabs wet on wet over them, it'll save you the sanding in between. I learned that the hard way too.
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)
1992 230 Explorer with 250 Yamaha
June 25, 2015, 02:51:37 PM
Reply #29
northfork
Information
Posts:
129
Re: 1977 22 -2 rebuild
«
Reply #29 on:
June 25, 2015, 02:51:37 PM »
Rick
I started to do that. I spent to much time working the fillets and they were kicking off. I had to many rough spots to lay over at that point. I thought better to take my time and sand then tab. Whats a couple of hours sanding at this point.
Chuck
Logged
Print
Pages:
1
2
3
4
...
7
Go Up
« previous
next »
Classic AquaSport
/
Aquasport Model Rebuilds, Mods, Updates and Refreshes
/
Osprey Style Hull Rebuilds
/
22-2 Rebuilds
/
1977 22 -2 rebuild
SimplePortal 2.3.5 © 2008-2012, SimplePortal