Attention: Have only 1 page to see today

Author Topic: 1985 29ft Aquasport Tournament hydraulic steering seal blown  (Read 1576 times)

July 27, 2012, 09:57:20 PM
Reply #15

FALCON

  • Information Offline
  • NorthEast
  • Posts: 3
Re: 1985 29ft Aquasport Tournament hydraulic steering seal b
« Reply #15 on: July 27, 2012, 09:57:20 PM »
I was just out for some fuel and a little ride, and the same thing happened to me.  I always check the reservoir before leaving the dock.  I had about 25psi on the tank.  Maybe a little high for an old system.  When I noticed the leak.  I lined up the rudders, opened the helm and bled off the pressure to save the oil.  I am going to order the parts and rebuild it myself.  Hopefully it will hold, otherwise there is a replacement model HH5273.
http://marineengineparts.com/shopsite_s ... ge415.html

Erik

1986 290TM





July 29, 2012, 10:57:33 AM
Reply #16

Rocketpip

  • Information Offline
  • Canada
  • Posts: 13
Re: 1985 29ft Aquasport Tournament hydraulic steering seal b
« Reply #16 on: July 29, 2012, 10:57:33 AM »
Found this link with some step by step with pictures.
It is the h50. So, I ordered the parts and they are being installed.
I think replacing the whole helm hyd unit would be wise. I'll look over the links.
Thanks everyone for all your help.

http://www.local1259iaff.org/hydraulichelmrebuild.html

August 02, 2012, 09:25:45 AM
Reply #17

FALCON

  • Information Offline
  • NorthEast
  • Posts: 3
Re: 1985 29ft Aquasport Tournament hydraulic steering seal b
« Reply #17 on: August 02, 2012, 09:25:45 AM »
Thanks Rocketpip great link it will help.

Erik

1986 290TM

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal