The new Photo Gallery

[Double Trouble]

I just uploaded a picture to the Gallery.      

[bondobill]

YEEHAA  
Now something else I got to try and figure out how to use

Bill

[GoneFission]

I did too!      It works again!!  

[RickK]

   

I upped the size limits to 1024x768 and the gallery will size the pics automatically if you load larger ones to it.
We'll have to see if those pics are too big for posting and causes unnecessary scrolling (that's why we had it set to 800x600), I am hoping most people have larger (17"+) monitors now with their resoultions set to 1280+.  We'll have to see how it goes.

There are some "forums" in the gallery, like Rebuilds in Progress that should be used to show one or two pics of your boat in progress, I think you should start a topic to document the entire rebuild. Another is Aquasports in Action - a great place to show a couple pics of your boat in motion.  Same with Pride and Joy - a few pics is plenty there - start a topic if you really want to show her off.
You can also create sub-folders in your gallery as you upload your pics.  A good way to create NEW organization - not sure I would try to move pics around due to the links that may have been posted to topics already.

Here is what a large pic looks like posted in a topic.  I uploaded it and it was 3000+px wide and the system handled it and converted it down for us.


Glad it's back  

This little thumbnail is also a way to show a small pic that can be clicked to show the large one in the gallery.


I'll document how to post pics from the new gallery soon and add it to the "how to post pics" thread.

[Circle Hooked]

Thanks for the heads up, must check it out.

[seabob4]

Damn, tried to post 5 pics of Wes' 200 Osprey, gave me an error...

1 at a time, I suppose... :(

[RickK]

We've been getting a timeout error ever since we switched to a new server - maybe that was the one you got?

[slvrlng]

I just tried to upload some and I thought it worked but I can't find them in my gallery. Any ideas or is it just not working again?

[slvrlng]

One at a time worked now I just need to figure out how to post them!

Okay, I can't get them to post other than the link to the pic. When I look at them in my gallery there is no code like the old directions show. I have tried every copying every link or code on the pic and none of them work. Any ideas?

[Capt. Bob]

Loaded fine for me. I must be doing something different/wrong?
I just browsed to my photo file on the laptop, clicked and it loaded. I didn't type in anything.

Maybe because I loaded it from my computer hard drive rather than Photo Bucket????

I'll try one from there.

[RickK]

One at a time worked now I just need to figure out how to post them!

Okay, I can't get them to post other than the link to the pic. When I look at them in my gallery there is no code like the old directions show. I have tried every copying every link or code on the pic and none of them work. Any ideas?

The code links are to the right of the pic AFTER you click on the pic.  The lower one is for the BIG pic, the top is for the thumbnail.  Copy either and paste into your post.

[slvrlng]

OK, I will try this again!

New guide posts finally on the trailer!

[RickK]

Man you repaired that split hull quick  

Guides look good    Look like galv water pipe with elbows and such  

[DOCREED]

I think you may be missing a prop blade!!!

[slvrlng]

Waiting on dhadley to get (hopefully) the right one in!

I tried a 4 blade 14 X17 and couldn't get over 4500 and 37 MPH. Also if I touched the trim up at all it would porpoise like crazy!

Next try is a 14 X 17 3 blade.