Menu

Attention: Have 2 pages to see today
« previous next »
Pages: 1   Go Down

Author Topic: draft  (Read 2226 times)

September 03, 2010, 02:30:31 PM
Read 2226 times

calcutta37

  • Information Offline
  • Posts: 2
draft
« on: September 03, 2010, 02:30:31 PM »
new here and love the old and new pics of these aquasports.  was really wondering what these boats draft say a 22'2 with a 150 yammie four stroke loaded down with ice and people? thanks chris
Logged
September 03, 2010, 05:15:25 PM
Reply #1

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Re: draft
« Reply #1 on: September 03, 2010, 05:15:25 PM »
222 Osprey draft is 9" according to the specs, and the 222 CCP draws a 10" draft, again according to the specs.
Logged
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209

September 03, 2010, 05:44:49 PM
Reply #2

calcutta37

  • Information Offline
  • Posts: 2
Re: draft
« Reply #2 on: September 03, 2010, 05:44:49 PM »
whats the diff in the two boats.
Logged
September 03, 2010, 08:41:56 PM
Reply #3

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: draft
« Reply #3 on: September 03, 2010, 08:41:56 PM »
Did someone say something about draft?  I'm up!
Logged


Corner of 520 and A1A...
September 03, 2010, 08:57:01 PM
Reply #4

fitz73222

  • Information Offline
  • Mechanical Master
  • Posts: 1957
    • http://www.hudson-technologies.com/.
Re: draft
« Reply #4 on: September 03, 2010, 08:57:01 PM »
73` 222, 12 degree deadrise, twin 115`s 12" draft, loaded, scuppers 2" below the waterline. Engines weigh 338# each plus stainless props.
Logged
1973 Aquasport 22-2, twin 115 Mercs
2000 Baycraft 175 flats boat, 60 Bigfoot Merc
1968 Boston Whaler 13, 25 Yamaha (project)
1966 Orlando Clipper 13, 9.9 Merc
September 04, 2010, 04:33:33 PM
Reply #5

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Re: draft
« Reply #5 on: September 04, 2010, 04:33:33 PM »
Logged
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209

September 05, 2010, 03:35:27 AM
Reply #6

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: draft
« Reply #6 on: September 05, 2010, 03:35:27 AM »
Welcome aboard calcutta37  :!:  :!:
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha
September 05, 2010, 06:53:08 AM
Reply #7

222 ccp dgraf

  • Information Offline
  • Posts: 34
Re: draft
« Reply #7 on: September 05, 2010, 06:53:08 AM »
I wonder how they figure the draft on that brochure??? Is that without a motor as the weight they are showing is without a motor.
Logged
September 05, 2010, 08:52:58 AM
Reply #8

MarshMarlowe196

  • Information Offline
  • Posts: 976
    • http://www.keywestboatsforum.com
Re: draft
« Reply #8 on: September 05, 2010, 08:52:58 AM »
Yeah, you gotta wonder.  9" seems like a skewed measurement-  The shallowest I've ever measured my draft in the 19-6 was 10" (no wet foam, new smaller lightweight console, 10gals of fuel) with NOBODY in the boat and me measuring while in the water.  Given that was with a 4cylinder OMC 90HP; I'm sure I could get marginally less draft with a 3cyl outboard, but I don't think anyone here is running a 22-2 with a 3cylinder outboard nor were they in the 70's.  It might be possible that a 22-2 would draft less than a 19-6 because there's more of the boat in contact with the water, but I'm thinking the added weight of a 22-2 would offset that.  With a small 2 stroke outboard matched to a 22-2, your real life draft is probably going to be closer to 10-11".
Logged
Key West 1720 / Yam C90

Sold: 1973 Aquasport 19-6
Pages: 1   Go Up
« previous next »
 

SimplePortal 2.3.5 © 2008-2012, SimplePortal