Aquasport / Dell Quay Dory ?

[popperguy]

Hi guys,
   I am new to these forums and have a question.  I recently bought a 1988 aquasport 131 with the dell quay decals on the side.  I have google searched alot with no luck.  From what I can see the body sure looks like the dell quay dorys.  Did aquasport buy the hull molds?  The hull identification # says its a aquasport.  

Also I have some water in the hull and I'm pretty sure of the intrusion spots.  I cut out a 3" x 12" section of the center of floor the foam and ply was wet 1" down and 1/4" on the bottom. The center was completly dry.  I pulled all the foam from that area.  I now pull out about 1 oz of water a day with a turkey baster.  It seems to wick out when I cover it up on hot days and then I might pull out 3 oz.  I'm fairly sure the boat isn't water completly water logged. I can easily lift the bow and stern by myself.  But my question is how long should I continue taking out water. At some point I just want to foam it with some ply sandwiched and then glass it.

Thanks, ANY HELP is greatly appreciated

[RickK]

Welcome aboard popperguy  :!:  :!:
I think you may have a different kind of Aquasport then you'll see in any of the pictures seen here on this forum.

Post a pic or two of what you're talking about and we'll more than likely be able to help you out.

[gran398]

Welcome! If she's thirteen feet, take the motor off, flip her,and set her up high enough so that air can circulate for a few weeks. Should dry out nicely. Flip her back over, and continue with the exploratory surgery.

Keep us posted. Tx.

[slvrlng]

Ya gotta love google!

http://www.youtube.com/watch?v=sdNpHdZK-w8

[Aswaff400]

wasnt there a guy on here that had a tri-hull style boat that wore the AS badges and HIN?

[GoneFission]

wasnt there a guy on here that had a tri-hull style boat that wore the AS badges and HIN?

That would be an X-Scape, when Aquasport got a little weird.