Attention: Have only 1 page to see today

Author Topic: 97 explorer cabin question for Seabob4  (Read 1637 times)

January 07, 2010, 07:26:22 PM
Read 1637 times

Circle Hooked

  • Information Offline
  • Posts: 2130
    • http://www.theaquasportboatclub.com/index.php
97 explorer cabin question for Seabob4
« on: January 07, 2010, 07:26:22 PM »
I'.m thinking about ripping out the white carpet in my cabin,what's under it just unfinished glass.Just trying to figure what i'm getting into before i start,and then what the next step should be thanks
Scott
1997 225 Explorer

January 07, 2010, 11:41:44 PM
Reply #1

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: 97 explorer cabin question for Seabob4
« Reply #1 on: January 07, 2010, 11:41:44 PM »
CH,
I assume you mean the cabin overhead.  Yes, You'll find raw glass above it, no big deal.

Mouse fur is a great replacement (google it), just save the stuff you rip out to use as a pattern for the new stuff you put in.  Contact cement is great for overhead installs... :thumright:

Bob C


Corner of 520 and A1A...

January 08, 2010, 02:37:20 PM
Reply #2

Circle Hooked

  • Information Offline
  • Posts: 2130
    • http://www.theaquasportboatclub.com/index.php
Re: 97 explorer cabin question for Seabob4
« Reply #2 on: January 08, 2010, 02:37:20 PM »
Is the mouse fur like the thin grey carpet they put in cars,for the first time google isn't as helpful as usual.Thanks
Scott
1997 225 Explorer

January 08, 2010, 02:51:52 PM
Reply #3

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6446
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

January 08, 2010, 02:56:47 PM
Reply #4

Circle Hooked

  • Information Offline
  • Posts: 2130
    • http://www.theaquasportboatclub.com/index.php
Re: 97 explorer cabin question for Seabob4
« Reply #4 on: January 08, 2010, 02:56:47 PM »
Also what do you think about paint or gel coat instead of material on the overhead.
Scott
1997 225 Explorer

January 08, 2010, 02:58:34 PM
Reply #5

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: 97 explorer cabin question for Seabob4
« Reply #5 on: January 08, 2010, 02:58:34 PM »
Bob, you are the man! :thumleft:  :thumleft:

Mouse fur, monkey fur, tomato, tomahto...

But I'll take mouse/monkey fur anyday over vinyl...


Corner of 520 and A1A...

January 08, 2010, 02:59:05 PM
Reply #6

Circle Hooked

  • Information Offline
  • Posts: 2130
    • http://www.theaquasportboatclub.com/index.php
Re: 97 explorer cabin question for Seabob4
« Reply #6 on: January 08, 2010, 02:59:05 PM »
Thanks Capt.Bob that looks better then the cat toys i kept finding
Scott
1997 225 Explorer

January 08, 2010, 03:02:20 PM
Reply #7

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: 97 explorer cabin question for Seabob4
« Reply #7 on: January 08, 2010, 03:02:20 PM »
Quote from: "Circle Hooked"
Also what do you think about paint or gel coat instead of material on the overhead.

Uhhhh, unless you want a stark cabin and really don't care if it is, have at it...

Me?  I'll go with the fur! :D


Corner of 520 and A1A...

January 08, 2010, 03:11:03 PM
Reply #8

Circle Hooked

  • Information Offline
  • Posts: 2130
    • http://www.theaquasportboatclub.com/index.php
Re: 97 explorer cabin question for Seabob4
« Reply #8 on: January 08, 2010, 03:11:03 PM »
Just kinda thinking out loud with the paint,the cabin has just been a hole to throw stuff in for 2-3 years now, and after meeting up with Rick at the gathering, i got the bug to start sleeping in it again.But i got mildew and its just nasty.
Scott
1997 225 Explorer

January 08, 2010, 03:57:46 PM
Reply #9

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: 97 explorer cabin question for Seabob4
« Reply #9 on: January 08, 2010, 03:57:46 PM »
Quote from: "Circle Hooked"
Just kinda thinking out loud with the paint,the cabin has just been a hole to throw stuff in for 2-3 years now, and after meeting up with Rick at the gathering, i got the bug to start sleeping in it again.But i got mildew and its just nasty.

So take the time to give her a good hosing down and clean up.  Bleach works good on mildew...but your not unlike a lot of people.  A cabin the size of your's basically becomes an oversized storage bin... :(


Corner of 520 and A1A...

January 08, 2010, 05:40:01 PM
Reply #10

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: 97 explorer cabin question for Seabob4
« Reply #10 on: January 08, 2010, 05:40:01 PM »
Quote from: "Circle Hooked"
Just kinda thinking out loud with the paint,the cabin has just been a hole to throw stuff in for 2-3 years now, and after meeting up with Rick at the gathering, i got the bug to start sleeping in it again.But i got mildew and its just nasty.
Hmmm, I've never had any mildew in the cabin yet  :scratch:   I leave the vent and the side windows open under the cover and leave the door closed so no critters decide to take up home there.
You gotta have it ready to sleep in for the next gathering in May so you can camp the night before and after the gathering with us.  :D

I would test a peice of the carpet with bleach - if it is made from what I think it is, bleach won't hurt it.  A lot of these carpets are made of Polypropylene - same stuff the bottles that hold your pool acid are made out of. Used to be in that business way back when.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

January 08, 2010, 07:40:26 PM
Reply #11

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6446
Re: 97 explorer cabin question for Seabob4
« Reply #11 on: January 08, 2010, 07:40:26 PM »
Quote from: "RickK"
Used to be in that business way back when.

"rope" or acid. :o
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

January 08, 2010, 10:01:46 PM
Reply #12

Circle Hooked

  • Information Offline
  • Posts: 2130
    • http://www.theaquasportboatclub.com/index.php
Re: 97 explorer cabin question for Seabob4
« Reply #12 on: January 08, 2010, 10:01:46 PM »
Before any thing else ill bleach it again [been there done that] just looking for a better way.

Maybe if the carpet wasn't white it wouldn't bother me as much,not that it's that bad,
i guess i'm just a clean freak.

I keep it vented like you Rick, and still get the mildew,even tried buckets of damp rid.

Thought about a solar powered fan to circulate the air just haven't done it.

Count me in for may.
Scott
1997 225 Explorer

January 09, 2010, 07:25:06 AM
Reply #13

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: 97 explorer cabin question for Seabob4
« Reply #13 on: January 09, 2010, 07:25:06 AM »
Quote from: "Capt. Bob"
Quote from: "RickK"
Used to be in that business way back when.

"rope" or acid. :o
Flooring
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

January 09, 2010, 07:36:58 AM
Reply #14

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: 97 explorer cabin question for Seabob4
« Reply #14 on: January 09, 2010, 07:36:58 AM »
Quote from: "Circle Hooked"
I keep it vented like you Rick, and still get the mildew,even tried buckets of damp rid.
I've been thinking about cutting some vents into the boat covers for more circulation.  I've seen some vents you can attach to them but haven't really researched it much.  I really need it for the 170 - the cover doesn't breathe very well.

Quote from: "Circle Hooked"
Count me in for may.
 :thumleft:
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal