Engine Rebuild

[nate44]

I have a 1984 75 hp Evinrude. THe bearing  is going out and I need to get a new powerhead. Anyone have a good reccomendation on who to use or not use. I'm looking for the most economical and best rebuild!!!!

thanks

Nate :sunny:

[Mad Dog]

Nate, Somewhere I have a link where you can get a rebuilt powerhead and turn yours in as a core or you came have yours rebuilt. I'll post it as soon as I can find it.

So how big is your boat?  I have a 175 Johnson of the same vintage as yours and I would make a deal just for you.  

MD  

[nate44]

Thanks for the reply, and please post the Company. Sorry, but I have a 17' Aquasport. Your 175 would sink my boat!!

 
Nate

[Mad Dog]

Nate, here is the site I mentioned...

http://nwfloridaoutboard.com/

MD  

[GoneFission]

These folks are in the northeast US and have a good reputation - you might want to give them a call:  

1OUTBOARD REMANUFACTURED OUTBOARDS & POWERHEAD REPLACEMENT  JOHNSON -EVINRUDE  

TOLL FREE 1 877 983 2537            

At 1OUTBOARD  we have a proven track record of 33 years in the outboard industry. We do over 1000 power heads a year for marine dealers and individuals. We offer long block assemblies from intake manifold back, with fresh rotating assembly  or complete pre run, broke in, drop on power heads. We also offer a while you wait rebuilding service in by 9 out by 4, with a fresh pre- run engine. WE DO IT RIGHT and back it up with a 1 YEAR WARRANTY ,Extended warranty offered

Hope this helps - good luck!

[Marcq]

These folks are in the northeast US and have a good reputation - you might want to give them a call:  

1OUTBOARD REMANUFACTURED OUTBOARDS & POWERHEAD REPLACEMENT  JOHNSON -EVINRUDE  

TOLL FREE 1 877 983 2537            

At 1OUTBOARD  we have a proven track record of 33 years in the outboard industry. We do over 1000 power heads a year for marine dealers and individuals. We offer long block assemblies from intake manifold back, with fresh rotating assembly  or complete pre run, broke in, drop on power heads. We also offer a while you wait rebuilding service in by 9 out by 4, with a fresh pre- run engine. WE DO IT RIGHT and back it up with a 1 YEAR WARRANTY ,Extended warranty offered

Hope this helps - good luck!

A1outboard/Blackbird ind !! I have read really bad stuff about that company
Here's some reading material and that is only a few example  
http://www.thehulltruth.com/boating-for ... es-12.html

http://forums.screamandfly.com/forums/s ... =Blackbird

http://forums.screamandfly.com/forums/s ... =Blackbird



Marc..

[MarshMarlowe196]

These folks are in the northeast US and have a good reputation - you might want to give them a call:

1OUTBOARD REMANUFACTURED OUTBOARDS & POWERHEAD REPLACEMENT JOHNSON -EVINRUDE

TOLL FREE 1 877 983 2537

At 1OUTBOARD we have a proven track record of 33 years in the outboard industry. We do over 1000 power heads a year for marine dealers and individuals. We offer long block assemblies from intake manifold back, with fresh rotating assembly or complete pre run, broke in, drop on power heads. We also offer a while you wait rebuilding service in by 9 out by 4, with a fresh pre- run engine. WE DO IT RIGHT and back it up with a 1 YEAR WARRANTY ,Extended warranty offered

Hope this helps - good luck!

A1outboard/Blackbird ind !! I have read really bad stuff about that company
Here's some reading material and that is only a few example
http://www.thehulltruth.com/boating-for ... es-12.html

http://forums.screamandfly.com/forums/s ... =Blackbird

http://forums.screamandfly.com/forums/s ... =Blackbird



Marc..

Wow, I didn't know the bad rep went beyond THT.  I read that thread on A1 on THT as well, and it stretched out several pages.  Many many angry customers.  Beware!!!

[Mad Dog]

Here is another rebuilder to look at.

http://1outboard.com/index.html

MD  

[MarshMarlowe196]

Here is another rebuilder to look at.

http://1outboard.com/index.html

MD

I believe that's the same company as mentioned above...

[Mad Dog]

I believe that's the same company as mentioned above...

You are right.  It was a bookmark I ran across... didn't read the previous post, appologies.

MD