Attention: Have only 1 page to see today

Author Topic: 2 TOPICS- GAS GUAGE ONLY SAYS E+ AND NEED A NEW CANOPY  (Read 736 times)

November 12, 2007, 09:10:55 PM
Read 736 times

BOB DOC

  • Information Offline
  • Posts: 34
2 TOPICS- GAS GUAGE ONLY SAYS E+ AND NEED A NEW CANOPY
« on: November 12, 2007, 09:10:55 PM »
HI Y'ALL
Bob Doc from Chattanooga. Finally got the 1980,246 Family Fisherman home from Fla. Ran it in the Gulf for bout an hour and after a few chokes on some lingering stale gas she performed nicely.
Put 50 + gals in it but the guage went just above empty and stopped like it hit a wall. It does not move from there. Whaddya think.
Also I'm surely going to replace the original equip canopy.
Again any direction would be appreciated.
Resigned to not getting either an owners or wiring manual as from all input they were probably not issued in THOSE DAYS.
Have some frinds who will rewire for YEUNGLING and that'l be good for me as my untechnical person will be forced to become enlightened.
Any help on the two requests?
Thanks in advance, Bob Dougherty

Sláinte, 1980 246 AQUASPORT FAMILY FISHERMAN
1990 YAMAHA 150 SALTWATER SERIES HEADED TO CALIF.

November 12, 2007, 11:37:20 PM
Reply #1

John Jones

  • Information Offline
  • Posts: 2829
(No subject)
« Reply #1 on: November 12, 2007, 11:37:20 PM »
Get your technical friends to look at this website.  Troubleshooting instructions for all sorts of gauges and senders.

http://www.teleflexmarine.com/cgi-bin/l ... brary=1019


RickK can instruct you on canvas.  His boat has more canvas than all the rest of us combined.   :wink:
Politics have no relation to morals.
Niccolo Machiavelli

November 13, 2007, 05:15:10 AM
Reply #2

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11283
(No subject)
« Reply #2 on: November 13, 2007, 05:15:10 AM »
:lol:  :lol:
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

November 13, 2007, 08:39:02 AM
Reply #3

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6446
Re: 2 TOPICS- GAS GUAGE ONLY SAYS E+ AND NEED A NEW CANOPY
« Reply #3 on: November 13, 2007, 08:39:02 AM »
Quote from: "BOB DOC"
HI Y'ALL
Bob Doc from Chattanooga. Finally got the 1980,246 Family Fisherman home from Fla. Ran it in the Gulf for bout an hour and after a few chokes on some lingering stale gas she performed nicely.
Put 50 + gals in it but the guage went just above empty and stopped like it hit a wall. It does not move from there. Whaddya think.


It sounds like the sending unit has given up the ghost. They (senders) reside in a harsh environment. Corrosion is the cancer that does them in. Replacement is the cure. Little to fail on the gauge but if cost is not a factor then do both. I would verture to guess that the gauge is funtional unless you dropped something on it, say a monkey wrench or frozen beer can.
Good Luck.
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

November 13, 2007, 08:56:41 AM
Reply #4

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Sender
« Reply #4 on: November 13, 2007, 08:56:41 AM »
I've got an almost new Teleflex sender that came out of my old tank.  The new tank came with a new sender installed.  It is currently set up for a 13" deep tank.  If you want it, PM me and it's yours.
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209


 


SimplePortal 2.3.5 © 2008-2012, SimplePortal