Attention: Have 2 pages to see today

Author Topic: The 170 is here :-)  (Read 2603 times)

October 13, 2007, 05:13:27 PM
Read 2603 times

jeff23

  • Information Offline
  • Posts: 28
The 170 is here :-)
« on: October 13, 2007, 05:13:27 PM »
My "new" 1979 Aquasport is here--picked her up today. :D   Once I get her registered, I'm going for a ride.  Engine is a 2001 75hp Merc.  This is fourth boat I've owned--the others were two aluminum skiffs (one was a duck boat) and a 1989 McKee Craft 16'.  I'l be using her for inshore fishing in Long Island Sound. Right now it's gusting 25 kts or so, but once the wind dies down a bit, I can look for stripers later this week :D

I'm already looking for a part- want to get a windshield I can see through.









 

   

Feels like my first serious boat--been fishing with other guys or out of my skiff for years.  Ah, life is good!

Jeff
1979 170 w/01 75hp Merc

October 13, 2007, 08:04:30 PM
Reply #1

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11281
(No subject)
« Reply #1 on: October 13, 2007, 08:04:30 PM »
Congrats Jeff.  :!:  :!:  Your son looks like he can't wait to get out in it too.

Looks like she still has the original rub rail. Nice looking boat.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

October 13, 2007, 10:39:51 PM
Reply #2

Miguel

  • Information Offline
  • Panama
  • Posts: 292
(No subject)
« Reply #2 on: October 13, 2007, 10:39:51 PM »
Congratulations!!!!!! :D
I hope you have a lot of fun with it.
Miguel
1985 Osprey 170 / 1992 115HP Mariner
[/url]

October 14, 2007, 08:58:43 AM
Reply #3

John Jones

  • Information Offline
  • Posts: 2829
(No subject)
« Reply #3 on: October 14, 2007, 08:58:43 AM »
Politics have no relation to morals.
Niccolo Machiavelli

October 14, 2007, 11:25:44 AM
Reply #4

jeff23

  • Information Offline
  • Posts: 28
(No subject)
« Reply #4 on: October 14, 2007, 11:25:44 AM »
Thanks guys and thanks John for the link.  My kid Tommy is really psyched to go fishing.  We still have some season left here, although I have to be out of my slip at the Town Dock on 11/1.  The ramp's maybe a mile from my house.
1979 170 w/01 75hp Merc

October 14, 2007, 12:29:10 PM
Reply #5

DoOver

  • Information Offline
  • Posts: 17
(No subject)
« Reply #5 on: October 14, 2007, 12:29:10 PM »
She is really clean!  Like is good! Best of luck with her!
Brian :D
72  170 Aquasport
140 Johnson Sold I\'m Hating It!

October 14, 2007, 04:24:24 PM
Reply #6

John Jones

  • Information Offline
  • Posts: 2829
(No subject)
« Reply #6 on: October 14, 2007, 04:24:24 PM »
I had a boat with a smoked windshield, not as dark as that.  I hated it.  Can't see at all in low visibility or at night.
Politics have no relation to morals.
Niccolo Machiavelli

October 14, 2007, 04:45:01 PM
Reply #7

bamafaninfl

  • Information Offline
  • Posts: 37
(No subject)
« Reply #7 on: October 14, 2007, 04:45:01 PM »
Congratulations!!!!!!   :lol:   :D
1977 Aquasport 170

October 15, 2007, 08:28:41 AM
Reply #8

MJB

  • Information Offline
  • Master Rebuilder
  • Posts: 95
(No subject)
« Reply #8 on: October 15, 2007, 08:28:41 AM »
Jeff23,

Nice looking 17', I'm sure you'll enjoy it!!  Since I've picked up my project 17' quite a few people I have spoken with about it have had nothing but good things to say about boat.  Hope you get her in the water soon!!
Mike
AB, NC
1976 Aquasport 170
1988 MAKO 285

October 15, 2007, 07:02:36 PM
Reply #9

jeff23

  • Information Offline
  • Posts: 28
(No subject)
« Reply #9 on: October 15, 2007, 07:02:36 PM »
Thanks MJB--  actually I was looking at all your pictures of your rebuild!  Neat to see what's inside the boat, and possibly I'll have to do the transom someday.  It's good and rigid at this point so I'm not going to mess with it.  I'd be interested to know what the signs of a wet transom are, however.

Thanks again--I sent you a pm the other day but maybe I didn't do it right :-)

My boat karma must be good--I took a deposit from a buyer on my old boat today!

Best,

Jeff
1979 170 w/01 75hp Merc

October 15, 2007, 07:36:45 PM
Reply #10

MJB

  • Information Offline
  • Master Rebuilder
  • Posts: 95
(No subject)
« Reply #10 on: October 15, 2007, 07:36:45 PM »
I had long cracks on the top of the transom where the liner and hull were joined originally which undoubtably let water in.  Also quite a few drilled holes in the transom for who know's what -- my guess was an old swim platform, splash board, and probably a transducer -- the holes were filled in with a silicone sealant, not exactly the best material.  Also did not have original motor, so had additional holes drilled through.  Needless to say it was in sad shape.

Couple ways to check the transom: 1) visually inspect (mine was a sure tell, otherwise this is not exactly reliable), 2) shake/step/bounce on one of the fins of the lower unit and see how much the transom gives -- if any, 3) you might see some brown water seeping out of a hole or previously filled hole (saw that in my other boat in the bilge), 4) you might see where the motor is bolted and see stress cracks around the bolt holes and possibly start to compress in and around the bolt washers/nut, 5) you could even drill a couple small test holes in the lower portion of the transom and see if you got any of the brown water seeping out (I'd only do this if I was really sure I had a problem, or I had a good plan to fill the hole with some resin/filler).  

Depending upon how much you were going to invest in a boat, a Marine Surveyor would probably be a good idea and money well spent.  

Mine was a project from the beginning and likely in much worse condition than your's could be in -- enjoy it!!!  

Didn't get a PM??
Mike
AB, NC
1976 Aquasport 170
1988 MAKO 285

October 15, 2007, 09:32:14 PM
Reply #11

jeff23

  • Information Offline
  • Posts: 28
(No subject)
« Reply #11 on: October 15, 2007, 09:32:14 PM »
Wow, Thanks Mike-- this board is so amazingly helpful.  Just got the boat and I can find out what to look for from someone who has been there, much appreciated :D

My PM ended up in the out box, not the send box--I must have neglected to push a button!

Think I'll perform the tests you mention just to see what happens.

Best,

Jeff
1979 170 w/01 75hp Merc

October 15, 2007, 09:43:54 PM
Reply #12

LilRichard

  • Information Offline
  • Master Rebuilder
  • Posts: 1244
(No subject)
« Reply #12 on: October 15, 2007, 09:43:54 PM »
Nice rig... good luck and keep us updated...

October 16, 2007, 07:22:40 AM
Reply #13

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11281
(No subject)
« Reply #13 on: October 16, 2007, 07:22:40 AM »
Quote from: "jeff23"
My PM ended up in the out box, not the send box--I must have neglected to push a button!

The PM will sit in the outbox until the recipient reads it.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

October 16, 2007, 08:20:00 AM
Reply #14

MJB

  • Information Offline
  • Master Rebuilder
  • Posts: 95
(No subject)
« Reply #14 on: October 16, 2007, 08:20:00 AM »
Rick,

How do I know I have a PM??  Do I receive an email notice??
Mike
AB, NC
1976 Aquasport 170
1988 MAKO 285

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal