Looking for guidance on searching CAS site. 19-6 FF - 1977

[soundview]

Could someone direct me to the right forum for info on 19-6 stringers? My local fiberglass guy is starting a floor (sole?) replacement on my beloved 1977 19-6 FF and, although he has worked on many boats over the years, he has not worked on this particular model.

I am relatively new to this site and am overwhelmed at the amount of information. Any help in getting the hang of how to search the site to find specific information would be much appreciated.

IN particular, I am looking for some photos of the stringers and fuel tank tub on a 19-6 that has been opened up.

Thank you.

[dbiscayne]

Can't help you with the fuel tank coffin pics my tank was above deck. Stringers were made from a one piece grid similar to Seacraft boats and filled with foam. These are from a 1971, should be similar to yours but you won't have the outer stringers along the chines. On the pics below I've already cut the tops off the stringers except in the first pic to remove wet foam.

[RickK]

This was from the '78 catalog - doesn't matter the model, they all had the fiberglass stringer inserts and they were filled with foam.

[Capt. Bob]

https://classicaquasport.com/smf/index.php?topic=11003.0

This is from a 74 model but should be very similar to your 77.
Also, there are other rebuilds in this sub forum which is dedicated to the 19-6 hulls.