275 Explorer Holding Tank

[Pjfinley]

Can anyone help me with this predicament????

I have a 2000 275 Explorer hull.  I think the previous owner removed the holding tank all together from the vessel.  (IF my ex-husband had gotten a proper survey I would have found this out 5 years ago - lol)

Cannot find a holding tank...waste pump out line goes directly to port scupper.  Is it possible that someone who owns one of these could send me photos of where the holding tank should be (Im assuming port side due to Waste Pump out and where plumbing lines come out from starboard location of head?)ps-I have no generator on starboard side.

i appreciate any help with this.

[Capt. Bob]

See if this link helps.
https://classicaquasport.com/smf/index.php?topic=14763.msg145516#msg145516
This last post shows the tank location and its pump out switch from the Factory but the whole thread may provide you with additional insight to your model. You may wish to download the generic manual and browse the items relative to the 275.

This next link was taken from an old thread on the THT forum. If you locate the tank, this indicates where the optional pump out switch is located.
https://www.thehulltruth.com/boating-forum/186847-2003-aquasport-275-explorer-washdown.html
The thread subject deals with the wash down/live well/ operation but Post #6 relates to the holding tank switch.

The previous owner may have removed the tank or…..there is the possibility that your model did not come with a holding tank. Stranger things have been noted over the years concerning Aquas.

Good luck.