Attention: Have only 1 page to see today

Author Topic: ISO front and side curtains for bimini enclosure on a 2000 215 explorer  (Read 414 times)

March 23, 2024, 09:56:09 AM
Read 414 times

MSEAS

  • Information Offline
  • Posts: 2
In need of front and side curtains for bimini enclosure. Needed for templates so do not have to be in good condition.  If someone has full enclosure in decent condition I would purchase as well.  Let me know, thanks.

March 24, 2024, 05:00:54 AM
Reply #1

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11275
I had mine custom made - he made the helm bimini, then the extended bimini and then he made the enclosure pieces all the way around. Any canvas guy worth his salt can do this. No need for templates because each bimini is different. The guy that made mine was an artist.


Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

March 24, 2024, 02:04:06 PM
Reply #2

MSEAS

  • Information Offline
  • Posts: 2
That enclosure looks great!  I just purchased the boat for a great price and did not want to invest almost as much into the enclosure as I paid for the boat.  Wanted to redo some older ones myself. I know they would be different sizes for hardtop vs Bimini top but assume the Bimini tops are the same size.

March 24, 2024, 06:26:18 PM
Reply #3

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11275
Thanks, yeah the whole bimini pkg + full cover wasn't cheap but in the long run, it was worth it. Sheds water like a drum.  Do you have a hard top?
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

March 25, 2024, 03:09:18 PM
Reply #4

MSEAS

  • Information Offline
  • Posts: 2
I just have the soft top bimini with just the rear curtain right now.


March 26, 2024, 02:39:22 PM
Reply #5

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11275
I would contact a canvas guy or two and get a quote, Does the bimini still have the zippers on the front and sides for the eisenglass? Kinda looks like you do and you have the snaps still in place so it should be easy for the guy to make.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal