I have a deal pending on. A 2004 osprey 215 with a matching 225 Yamaha 4 stroke.The boat is in mint shape but I do have a question about a water stain 3/4 the way up the bilge pump. The PO states it was there when he bought the boat 2 summers ago and that he kept it on a trailer other than a week or two during vacation. Do these boats trap water between the stringers or up at the bow until they are on a trailer?I also became very concerned after I made the deal when I googled that motor. Seems like every page that came up dealt with corrosion in the exchaust Hopefully this goes to my own introduction and not a response to the guys I clicked on? I could not find a post new topic button?
Welcome aboard! Yup, looks pretty rough. A gallon of bleach and a pressure washer will give you a better idea of what she looks like.As for the pictures - they are sideways because you took them with your phone in the vertical position instead of horizontal - you took the first one holding the phone horizontally. To fix them, after you upload them to your gallery, click on the pic in your gallery and to the right you'll see "Edit photo". Click that and one option is "Rotate CW" - click that and then at the bottom of the page you'll see "Submit changes". If you do this before you add them to your post, they'll appear correctly. If after, then you refresh your browser page and it'll show the changes. (This is what I did)
Quote from: RickK on May 10, 2018, 05:05:42 AMWelcome aboard! Yup, looks pretty rough. A gallon of bleach and a pressure washer will give you a better idea of what she looks like.As for the pictures - they are sideways because you took them with your phone in the vertical position instead of horizontal - you took the first one holding the phone horizontally. To fix them, after you upload them to your gallery, click on the pic in your gallery and to the right you'll see "Edit photo". Click that and one option is "Rotate CW" - click that and then at the bottom of the page you'll see "Submit changes". If you do this before you add them to your post, they'll appear correctly. If after, then you refresh your browser page and it'll show the changes. (This is what I did)Thank you! Seems like they either corrected themselves or you helped. Anyways, I'll be starting a build thread soon. I plan on doing a Vlog on YouTube of my build, as I couldnt find anyone else that did any, Im sure they are on there, just couldnt find one.