Menu

Attention: Have only 1 page to see today
« previous next »
Pages: 1   Go Down

Author Topic: Aeon 23 Build  (Read 1540 times)

July 09, 2014, 02:45:04 PM
Read 1540 times

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Aeon 23 Build
« on: July 09, 2014, 02:45:04 PM »
Logged
July 09, 2014, 02:56:18 PM
Reply #1

redemn93

  • Information Offline
  • Posts: 234
Re: Aeon 23 Build
« Reply #1 on: July 09, 2014, 02:56:18 PM »
that is beautiful.  wonder what the final bill was.  the build looks fantastic.
Logged
Jason.  1987 200 Osprey - almost done...for now
July 09, 2014, 03:06:45 PM
Reply #2

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: Aeon 23 Build
« Reply #2 on: July 09, 2014, 03:06:45 PM »
J, here's her sissie for $79,900.00 :shock:

http://www.boattrader.com/listing/2014- ... -102281414

Logged
July 09, 2014, 03:27:33 PM
Reply #3

redemn93

  • Information Offline
  • Posts: 234
Re: Aeon 23 Build
« Reply #3 on: July 09, 2014, 03:27:33 PM »
daaaaayum!!  this one has 44 hours on it.  so what, $90k brand spanking new?   :pukel:
Logged
Jason.  1987 200 Osprey - almost done...for now
July 09, 2014, 04:43:33 PM
Reply #4

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11277
Re: Aeon 23 Build
« Reply #4 on: July 09, 2014, 04:43:33 PM »
Sure looks like your boat Scott - a clone. (sheer and such)
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha
July 09, 2014, 07:41:00 PM
Reply #5

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: Aeon 23 Build
« Reply #5 on: July 09, 2014, 07:41:00 PM »
Rick, I agree. Need to look at it bit more carefully, but even the strakes seem to line up. Aaron has (or did have) one at his work, would be cool to see them side by side.
Logged
July 09, 2014, 07:55:01 PM
Reply #6

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11277
Re: Aeon 23 Build
« Reply #6 on: July 09, 2014, 07:55:01 PM »
I think if you do a search this boat is made by Bayside marine.  Could be wrong but I think my memory serves me well still.
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha
July 09, 2014, 08:01:43 PM
Reply #7

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11277
Re: Aeon 23 Build
« Reply #7 on: July 09, 2014, 08:01:43 PM »
Let's compare - excuse the models in the first pic


Bayside's
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha
July 09, 2014, 08:17:27 PM
Reply #8

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: Aeon 23 Build
« Reply #8 on: July 09, 2014, 08:17:27 PM »
Wow...they look exactly the same, except the Aeon has an extra strake :shock:

Bayside, they were the English couple. Seems like I remember they sold out a year or two back. One of the parts they made was a drop-in casting deck for an AS  22-2...spoke with them when got Miss Marco. The casting deck was just like the Aeon. So joining the dotted lines....could well be a splash of the bottom, with the strakes removed, then four strakes tooled back in before making the mold. Wouldn't be all that difficult in the scheme of things. Must have thought the extra strake would dry out the ride.

Betcha one of the Tampa builders can fill us in.
Logged
July 09, 2014, 09:20:43 PM
Reply #9

MarshMarlowe196

  • Information Offline
  • Posts: 976
    • http://www.keywestboatsforum.com
Re: Aeon 23 Build
« Reply #9 on: July 09, 2014, 09:20:43 PM »
Those extra outboard strakes look like they run all the way to the stern, and the original strakes look like they've been extended much further aft.  I'd bet that squeezed a few more mph out of the top end with the added lift and reduced drag with less hull in the water when compared to the AS22-2.  Looks like the chine is harder/more reversed too which will make it run drier, but it will be noisier when stalking fish with more hull slap.  Nothing you couldn't do yourself.  Me and dad did the same thing to an old 18' Larson as an experiment several years ago.  The boat picked up 5 mph on the top end, and ran drier.  Didn't cost us an extra $50k though.
Logged
Key West 1720 / Yam C90

Sold: 1973 Aquasport 19-6
July 09, 2014, 09:35:36 PM
Reply #10

bondobill

  • Information Offline
  • West Coast
  • Posts: 566
    • http://www.charliesautobodyinc.com/
Re: Aeon 23 Build
« Reply #10 on: July 09, 2014, 09:35:36 PM »
Quote from: "RickK"
Sure looks like your boat Scott - a clone. (sheer and such)

Exact same thought I had when I saw it
Logged
1979 222 FF

"There is no such thing as a good tax."

"We contend that for a nation to tax itself into prosperity is like a man standing in a bucket and trying to lift himself up by the handle."

- Winston Churchill

Bill
July 10, 2014, 05:34:41 AM
Reply #11

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11277
Re: Aeon 23 Build
« Reply #11 on: July 10, 2014, 05:34:41 AM »
They're members here so if they stop by they can fill us in.
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha
Pages: 1   Go Up
« previous next »
 

SimplePortal 2.3.5 © 2008-2012, SimplePortal