Prop Help Wellcraft 210 Coastal (Aquasport 215)

[csvencer]

Repowering my 1996 Wellcraft 210 Coastal from a 200 Johnson to a 250 Suzuki and was wondering if anyone was running a 250 and what prop they were using.  I am thinking either a 16x20 or 16x21.5.  Thoughts?

-Svence

[seabob4]

Your pretty close, Cvence.  We did a lot of Zuke 250s at Proline, we were running some big props.  Pretty sure max dia is 17", but usually 16.5 X 19s and 21s...

[csvencer]

Thanks for the tip.  I picked up a 16x20 to see where that lands me. I think I may need a 21.5, but figure this should be a good starting point.

-Svence

[csvencer]

Seabob-

One more Q for you since I think you were at the factory when these were being built.  Any chance you know what the control cable length would be?  I am guessing right around 15' but not sure.  I checked the OMC cables on the boat but can't find them stamped anywhere.  I could measure once they're pulled but would like to order up the new stuff now.

Thanks.

-Svence