Attention: Have 2 pages to see today

Author Topic: Dimentions of a 19-6 console and seat  (Read 869 times)

April 08, 2014, 03:27:18 PM
Read 869 times

aquaholic17

  • Information Offline
  • Posts: 15
Dimentions of a 19-6 console and seat
« on: April 08, 2014, 03:27:18 PM »
Does anyone know the dimensions or have a diagram of the original console on a 19-6? the cooler seat would also be helpful. Width and height are the most important.

Thanks,
chad

April 09, 2014, 06:16:33 AM
Reply #1

aquaholic17

  • Information Offline
  • Posts: 15
Re: Dimentions of a 19-6 console and seat
« Reply #1 on: April 09, 2014, 06:16:33 AM »
so, nobody knows? Anyone have a 19-6 they could measure? I'm looking at a project '73 that is missing the console and seat. Well, it's missing everything. lol. I have a line on a few console's but need the dimensions to see if they will work.

Chad

April 09, 2014, 07:42:56 AM
Reply #2

SaltH2OHokie

  • Information Offline
  • Mid Atlantic
  • Posts: 345
Re: Dimentions of a 19-6 console and seat
« Reply #2 on: April 09, 2014, 07:42:56 AM »
Mine's up at the new house we're ever-so-slowly moving into, so its an hour away.  I'll gladly measure it this weekend when I get back up there.
Ryan

1975 Aquasport 19-6, 1985 Merc 115 Inline.
1970 Aquasport 22-2, 1987(ish) Yamaha 115 V4.
Former owner of 1988 Aquasport 290 TM.

Currently on nothing but cell phone/air card.  Which severely limits internet time.

April 09, 2014, 09:27:50 AM
Reply #3

gman 82 aquasport

  • Information Offline
  • Master Rebuilder
  • Posts: 594
Re: Dimentions of a 19-6 console and seat
« Reply #3 on: April 09, 2014, 09:27:50 AM »
I can send you the measurements tommorrow morning after I get off shift...I have the original console on mine, but when purchased it had 2 swival seats and I replaced them with a leaning post seat.. :salut:
1982 19-6 Osprey
1992 Johnson 150
"THERAPY"
Member # 2331

April 09, 2014, 10:00:23 AM
Reply #4

aquaholic17

  • Information Offline
  • Posts: 15
Re: Dimentions of a 19-6 console and seat
« Reply #4 on: April 09, 2014, 10:00:23 AM »
That would be great. Thank you both. I love this place.

Chad

April 13, 2014, 01:45:33 PM
Reply #5

aquaholic17

  • Information Offline
  • Posts: 15
Re: Dimentions of a 19-6 console and seat
« Reply #5 on: April 13, 2014, 01:45:33 PM »
Has anyone had a chance to measure your console yet?

April 13, 2014, 01:54:56 PM
Reply #6

fitz73222

  • Information Offline
  • Mechanical Master
  • Posts: 1957
    • http://www.hudson-technologies.com/.
Re: Dimentions of a 19-6 console and seat
« Reply #6 on: April 13, 2014, 01:54:56 PM »
I have a '75 cooler seat in stock from a 22-2 with flip flop backrest from Miss Delmarva which is the same as a 19-6 from '72-'77 if your vintage is similar for measurements.
1973 Aquasport 22-2, twin 115 Mercs
2000 Baycraft 175 flats boat, 60 Bigfoot Merc
1968 Boston Whaler 13, 25 Yamaha (project)
1966 Orlando Clipper 13, 9.9 Merc

April 13, 2014, 10:25:24 PM
Reply #7

aquaholic17

  • Information Offline
  • Posts: 15
Re: Dimentions of a 19-6 console and seat
« Reply #7 on: April 13, 2014, 10:25:24 PM »
the 19-6 in question is a '73, that would help. Ty

Chad

April 16, 2014, 11:57:14 AM
Reply #8

SaltH2OHokie

  • Information Offline
  • Mid Atlantic
  • Posts: 345
Re: Dimentions of a 19-6 console and seat
« Reply #8 on: April 16, 2014, 11:57:14 AM »
I actually measured mine, and wrote all the measurements on a scrap of paper that I left in the boat.   :roll:

I'm taking a mattress over to the new house this afternoon, so I'll try my darnedest to remember to grab said slip of paper.
Ryan

1975 Aquasport 19-6, 1985 Merc 115 Inline.
1970 Aquasport 22-2, 1987(ish) Yamaha 115 V4.
Former owner of 1988 Aquasport 290 TM.

Currently on nothing but cell phone/air card.  Which severely limits internet time.

April 16, 2014, 12:14:06 PM
Reply #9

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6452
Re: Dimentions of a 19-6 console and seat
« Reply #9 on: April 16, 2014, 12:14:06 PM »
Quote from: "SaltH2OHokie"
I actually measured mine, and wrote all the measurements on a scrap of paper that I left in the boat.

That was close.

For a moment I thought the dog had ate it. :mrgreen:
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

April 16, 2014, 01:21:29 PM
Reply #10

SaltH2OHokie

  • Information Offline
  • Mid Atlantic
  • Posts: 345
Re: Dimentions of a 19-6 console and seat
« Reply #10 on: April 16, 2014, 01:21:29 PM »
Quote from: "Capt. Bob"
Quote from: "SaltH2OHokie"
I actually measured mine, and wrote all the measurements on a scrap of paper that I left in the boat.

That was close.

For a moment I thought the dog had ate it. :mrgreen:

Man, you have no idea how true that would be if I said it.  We have brother and sister lab/hound mixes and the male weighs about 100lbs and eats anything he can scarf down...literally ANYTHING.

As a result, he's had surgery once to remove an obstruction (biiiiig clump of cuttings from the bushog...like size of a basketball) and barium swallows 3 other times to illuminate the various fun things he ate, plus numerous vet visits to poke and prod and make him poop...which, aside from the time he ate 10lbs of grass, have all passed without assistance (AA batteries, a cell phone charger, complete with 2' of wire, more of my ball caps that I can count, rocks, LOVEs barnacles...pulls those off of the bottom of our barge like he's at a rusty seafood buffet...etc. etc., so on and so forth).

That said, no...this time it was just me being in a hurry and forgetting to grab that paper when I left Sunday evening.
Ryan

1975 Aquasport 19-6, 1985 Merc 115 Inline.
1970 Aquasport 22-2, 1987(ish) Yamaha 115 V4.
Former owner of 1988 Aquasport 290 TM.

Currently on nothing but cell phone/air card.  Which severely limits internet time.

April 16, 2014, 06:11:17 PM
Reply #11

fitz73222

  • Information Offline
  • Mechanical Master
  • Posts: 1957
    • http://www.hudson-technologies.com/.
Re: Dimentions of a 19-6 console and seat
« Reply #11 on: April 16, 2014, 06:11:17 PM »
The original sliding fiberglass cooler seat sitting on the track is slightly trapazoidal in shape so I'm giving you the sizes at the bottom footprint. 16 1/2 front to back, 35 1/2 left to right and 16 1/2 from the floor to the top of the lid including about 1/2 for the track for overall height.
1973 Aquasport 22-2, twin 115 Mercs
2000 Baycraft 175 flats boat, 60 Bigfoot Merc
1968 Boston Whaler 13, 25 Yamaha (project)
1966 Orlando Clipper 13, 9.9 Merc

April 16, 2014, 06:43:36 PM
Reply #12

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: Dimentions of a 19-6 console and seat
« Reply #12 on: April 16, 2014, 06:43:36 PM »
Quote from: "SaltH2OHokie"
Quote from: "Capt. Bob"
Quote from: "SaltH2OHokie"
I actually measured mine, and wrote all the measurements on a scrap of paper that I left in the boat.

That was close.

For a moment I thought the dog had ate it. :mrgreen:

Man, you have no idea how true that would be if I said it.  We have brother and sister lab/hound mixes and the male weighs about 100lbs and eats anything he can scarf down...literally ANYTHING.

As a result, he's had surgery once to remove an obstruction (biiiiig clump of cuttings from the bushog...like size of a basketball) and barium swallows 3 other times to illuminate the various fun things he ate, plus numerous vet visits to poke and prod and make him poop...which, aside from the time he ate 10lbs of grass, have all passed without assistance (AA batteries, a cell phone charger, complete with 2' of wire, more of my ball caps that I can count, rocks, LOVEs barnacles...pulls those off of the bottom of our barge like he's at a rusty seafood buffet...etc. etc., so on and so forth).

That said, no...this time it was just me being in a hurry and forgetting to grab that paper when I left Sunday evening.

Once had a girlfriend like that. No batteries or anything, but man that girl could eat.

April 16, 2014, 08:48:44 PM
Reply #13

wingtime

  • Information Offline
  • Posts: 3581
    • http://50newtmotorclub.shutterfly.com/
Re: Dimentions of a 19-6 console and seat
« Reply #13 on: April 16, 2014, 08:48:44 PM »
Quote from: "gran398"
Once had a girlfriend like that. No batteries or anything, but man that girl could eat.

Nah the batteries went someplace else!  :roll:
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90

April 18, 2014, 05:15:09 AM
Reply #14

aquaholic17

  • Information Offline
  • Posts: 15
Re: Dimentions of a 19-6 console and seat
« Reply #14 on: April 18, 2014, 05:15:09 AM »
Quote from: "fitz73222"
The original sliding fiberglass cooler seat sitting on the track is slightly trapazoidal in shape so I'm giving you the sizes at the bottom footprint. 16 1/2 front to back, 35 1/2 left to right and 16 1/2 from the floor to the top of the lid including about 1/2 for the track for overall height.

Thank you much fitz, that is very helpful. Now all I need is the console dimensions. Now, as long as the dog doesn't eat anymore paper.....lol

chad

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal