Fletch's Hydra Sport 2100 CC

[Fletch170]

[Fletch170]

First Layer of 1708 is down. Will require a good sanding and grinding in areas to make this more flush with the existing wavy liner:(

Oh well, nothing some filler can't fix.....right?

[Fletch170]

Last cut made, the console is at the painters. Should have her back in a few weeks to start the rigging. (of the console that is)

As for the rest of the boat, I have 2 weeks to do some sanding and bondo before it gets shrink wrapped for the winter. Sorry to say, I just ran out of time and warm weather. So, come April will come the final glass/ fairing/ and paint. Then I get to put her all back together......the really fun part:)

[Fletch170]

Back at it, console finally got back from paint, and I got everything (but the windshield) installed. Will be rigging the electronics/wiring in the console on the rainy and cold days. Pulling the shrink wrap off this week and picking up where I left off.

[CLM65]

Console looks great!  I really like the layout.  Is that a NSS or Evo 2?  I have a NSS7 on my 205.  It will go on the tower of my flatback and I'll put an Evo 2 on the console.  Someday....

[Fletch170]

That there sir is the new Evo 2. Totally worth the money.

[Fletch170]

OK, let's start wiring this bad boy.

[Fletch170]

[Fletch170]

[Fletch170]

Whats up guys, got some work done today....which is awesome case it's been raining for about a month now. Got the transom cap glassed on and cut to form, as well as adding some roven betwen the layup of 1708, to remove a bit of a "dip" in the deck.

This weekend, I will be grinding and sanding the deck for the last layer of 1708.

[Que Pasa]

Fitting the floor to the liner really sux, looks like you past that part.

[RickK]

For that size dance floor you might consider renting a floor sanding machine - it would knock it out quickly, like a big floor buffing machine with sandpaper on it.

[Fletch170]

Thats actually a great idea! I wonder if my local rental place ha them.

[Fletch170]

[Fletch170]