You reached the limit of pages to see for today

Author Topic: 1986 28'10" center console rebuild  (Read 4765 times)

December 17, 2012, 04:11:17 PM
Read 4765 times

LOXCLAN

  • Information Offline
  • Posts: 12
1986 28'10" center console rebuild
« on: December 17, 2012, 04:11:17 PM »
1986 28'10" center console rebuild with full transom and twin 225 suzukis on a bracket . Photos coming soon !! Any info on this hull wold be appreciated. Would like to know the original weight etc ! Boat was gutted mostly and some improvements made including an in deck live well and new tank with an all aluminum console . I've heard these boats were few and far between and Aquasport only made around 50 or so .

December 17, 2012, 06:00:00 PM
Reply #1

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6446
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

December 17, 2012, 07:26:43 PM
Reply #2

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: 1986 28'10" center console rebuild
« Reply #2 on: December 17, 2012, 07:26:43 PM »
Obviously talk to Kieth on that girl.  LOVE a big CC!!! :cheers:  :cheers:


Corner of 520 and A1A...

December 19, 2012, 07:59:40 AM
Reply #3

LOXCLAN

  • Information Offline
  • Posts: 12
Re: 1986 28'10" center console rebuild
« Reply #3 on: December 19, 2012, 07:59:40 AM »
wondering the top end speed on this boat will be , removed the tanks and now have one 250 gallon tank and have twin 225 2 stroke suzukis . Also removed the million pound console !!! :lol:

December 20, 2012, 07:51:28 PM
Reply #4

LOXCLAN

  • Information Offline
  • Posts: 12
Re: 1986 28'10" center console rebuild
« Reply #4 on: December 20, 2012, 07:51:28 PM »
There are pics in the photo section I could not get them on this feed

December 20, 2012, 08:06:13 PM
Reply #5

Aswaff400

  • Information Offline
  • Master Rebuilder
  • Posts: 1627
Re: 1986 28'10" center console rebuild
« Reply #5 on: December 20, 2012, 08:06:13 PM »
Aaron
1996 200 Osprey SOLD
1968 22-2 Flatback SOLD
1993 210 Explorer SOLD
1991 Fountain 31TE SOLD
1989 Fountain 12-meter SOLD
1992 Talon F-20 SOLD
2021 Fountain 38TE QUAD 400's

December 20, 2012, 08:26:49 PM
Reply #6

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: 1986 28'10" center console rebuild
« Reply #6 on: December 20, 2012, 08:26:49 PM »
That IS sweet. Don't see any reason why she wouldn't run in the low 50's.

December 21, 2012, 08:44:43 AM
Reply #7

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: 1986 28'10" center console rebuild
« Reply #7 on: December 21, 2012, 08:44:43 AM »
I'd bet 47 at WOT...


Corner of 520 and A1A...

December 21, 2012, 09:34:01 AM
Reply #8

LOXCLAN

  • Information Offline
  • Posts: 12
Re: 1986 28'10" center console rebuild
« Reply #8 on: December 21, 2012, 09:34:01 AM »
Thank you for adding the pic !! I could not figure it out..... Finishing the bottom today then need to get it on the trailer to take it to start the aluminum work.... This long project is almost over ! :lol:

December 21, 2012, 09:47:39 AM
Reply #9

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: 1986 28'10" center console rebuild
« Reply #9 on: December 21, 2012, 09:47:39 AM »
Quote from: "seabob4"
I'd bet 47 at WOT...


Faster than that!

Check out the new paint! :lol:

December 21, 2012, 12:31:31 PM
Reply #10

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: 1986 28'10" center console rebuild
« Reply #10 on: December 21, 2012, 12:31:31 PM »
Oh, that's it Scotty!  Like that VC-17, or whatever it is that Interlux calls it, sposed to make sailboats faster... :roll:  :roll:

They need all the help they can get!


Corner of 520 and A1A...

December 21, 2012, 01:50:04 PM
Reply #11

wingtime

  • Information Offline
  • Posts: 3581
    • http://50newtmotorclub.shutterfly.com/
Re: 1986 28'10" center console rebuild
« Reply #11 on: December 21, 2012, 01:50:04 PM »
Wow!  That is a beautiful boat!  Can't wait to see her all done and in the water!
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90

December 21, 2012, 05:03:00 PM
Reply #12

Keith Knecht

  • Information Offline
  • Posts: 167
    • http://MinnowsandMonsters.com
Re: 1986 28'10" center console rebuild
« Reply #12 on: December 21, 2012, 05:03:00 PM »
I'm with gran,  low 50's.  I had two.  Dryhull is 4750#.  I had three different power setups.  Twin 150's, 200, and 250.  The motors were not on a bracket and I would expect low 50's with what you describe as your finished product. I got mid 50's with the 250's and right at 50 with the 200's.  The 150's would hit mid 40's.  The most efficient setup fuel wise was the 200's. That was with two gas tanks. Used to run both motors off the front tank till I drained it down a little and then switched over to both motors off both tanks.

Ran into a guy once, at the boat ramp, that had been busted for running drugs in a 271 Osprey.  The 271 was the same boat as the 281 just different years.  They only made the boat in 86 and 87.  Some weren't titled till 88.  Fifty was the number I heard as to the total made of that model.  He told me that they removed the front tank for space to haul the drugs.  Loved mine.  It would drowned you but never pound you.  It rode like a tank but I could get up in less than two feet with the motors tilted up.

December 21, 2012, 05:24:26 PM
Reply #13

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: 1986 28'10" center console rebuild
« Reply #13 on: December 21, 2012, 05:24:26 PM »
The man speaks! :salut:  :salut:


Corner of 520 and A1A...

December 22, 2012, 08:56:21 AM
Reply #14

LOXCLAN

  • Information Offline
  • Posts: 12
Re: 1986 28'10" center console rebuild
« Reply #14 on: December 22, 2012, 08:56:21 AM »
Keith do you think a spray rail will help or cause some pound ? I used to run a Hatteras 45 and we put a full length spray rail , we dried her up a bit but she would bang on a quarter sea . I don't know if you have ever put one on these hulls and if you have what the degree was ? I appreciate the info on this hull , I wanted a wide platform to start with and this boatb" turned me on " I watched it go from one person to another and finally waited the guy out to get tired of the project , I watched all he did to it and picked it up for a good price and as you can see I'm almost done ! :cheers:  :cheers:

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal