Menu

Attention: Have 2 pages to see today
« previous next »
Pages: 1   Go Down

Author Topic: Pics of gauges and layout for a 170 CC  (Read 559 times)

April 06, 2012, 07:29:33 PM
Read 559 times

kraw2

  • Information Offline
  • Posts: 288
Pics of gauges and layout for a 170 CC
« on: April 06, 2012, 07:29:33 PM »
I received the gauges from Boatersland (thanks Seabob) and did the layout, drilled the holes, and now the console is ready for more sanding and priming for the Awlgrip paint. The cardboard piece was a layout of the switch panel. The switch panel will be narrower when finished.









I didn't have any purple wire for the 12v + feed but it will be corrected and marked at the terminal block used to connect all of the console wiring. When the console is finished all wiring will connected so it can be installed and removed without cutting wires.
Logged
April 06, 2012, 10:59:20 PM
Reply #1

ceejkay

  • Information Offline
  • Posts: 77
Re: Pics of gauges and layout for a 170 CC
« Reply #1 on: April 06, 2012, 10:59:20 PM »
that looks pretty good. is the speed gauge just there for uniformity purposes?
Logged
April 07, 2012, 10:57:08 AM
Reply #2

kraw2

  • Information Offline
  • Posts: 288
Re: Pics of gauges and layout for a 170 CC
« Reply #2 on: April 07, 2012, 10:57:08 AM »
Quote from: "ceejkay"
that looks pretty good. is the speed gauge just there for uniformity purposes?


Yes it is. Glad you caught that.

My neighbor is buying the boat and it is his first boat. It will be used for family fun so no GPS.
Logged
Pages: 1   Go Up
« previous next »
 

SimplePortal 2.3.5 © 2008-2012, SimplePortal