Attention: Have only 1 page to see today

Author Topic: New Switch Panel  (Read 1184 times)

January 10, 2012, 01:47:26 PM
Reply #15

Mark Sr

  • Information Offline
  • Posts: 183
Re: New Switch Panel
« Reply #15 on: January 10, 2012, 01:47:26 PM »
I called Marine Connection today to see if they had any of the matching harnesses.No luck,they said they don't keep them because they come from so many different hookups.They claim they have no way of knowing what connects to what.I have until it gets warm to decide what to do.My thanks to all for help.
Mark Sr
 
 \'98 Aquasport 245 Tournament Master

January 10, 2012, 09:13:32 PM
Reply #16

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11267
Re: New Switch Panel
« Reply #16 on: January 10, 2012, 09:13:32 PM »
Bummer  :(
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

January 10, 2012, 09:32:01 PM
Reply #17

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: New Switch Panel
« Reply #17 on: January 10, 2012, 09:32:01 PM »
Mark,
If you can find someone who will loan you the crimper, Deutsch connectors are the way to go.  The connector bodies and pins are pretty cheap, it's the crimper that stops people dead in their tracks, considering that it's only use is to crimp Deutsch pins...


Corner of 520 and A1A...

January 11, 2012, 11:47:55 AM
Reply #18

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: New Switch Panel
« Reply #18 on: January 11, 2012, 11:47:55 AM »
Mark, was in Radio Shack this morn, they have Molex connectors very similar to yours, 12-, 9-, 6-, 4-, 3-, and 2-pin connectors, come with pins...


Corner of 520 and A1A...

January 11, 2012, 01:43:47 PM
Reply #19

Mark Sr

  • Information Offline
  • Posts: 183
Re: New Switch Panel
« Reply #19 on: January 11, 2012, 01:43:47 PM »
Thanks Bob,
I'll have to try Radio Shack.Do you still need a special crimper for there pins?
Mark Sr
 
 \'98 Aquasport 245 Tournament Master

January 11, 2012, 02:16:16 PM
Reply #20

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: New Switch Panel
« Reply #20 on: January 11, 2012, 02:16:16 PM »
Quote from: "Mark Sr"
Thanks Bob,
I'll have to try Radio Shack.Do you still need a special crimper for there pins?

Supposedly, yes, but I have crimped MANY a Molex pin with needle-nose pliers...


Corner of 520 and A1A...

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal