Attention: Have 2 pages to see today

Author Topic: Replacement parts  (Read 1506 times)

December 10, 2011, 07:02:27 PM
Read 1506 times

gatord413

  • Information Offline
  • Posts: 3
Replacement parts
« on: December 10, 2011, 07:02:27 PM »
I just bought a 2003 215 Explorer. I would like to replace the side coaming pads to look original. Any ideas where replacements may be available?

December 10, 2011, 07:10:05 PM
Reply #1

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Replacement parts
« Reply #1 on: December 10, 2011, 07:10:05 PM »
Pete or Marc,
MCL, do they have any upholstery?  gatord, you may have to go to a local seamstress/canvas shop...


Corner of 520 and A1A...

December 10, 2011, 08:28:42 PM
Reply #2

Circle Hooked

  • Information Offline
  • Posts: 2130
    • http://www.theaquasportboatclub.com/index.php
Re: Replacement parts
« Reply #2 on: December 10, 2011, 08:28:42 PM »
You won't find original, i dug though MCL for 2 hours just looking for those last year, non to be had, ended up getting some that were kind of close.
Scott
1997 225 Explorer

December 10, 2011, 08:37:30 PM
Reply #3

flounderpounder225

  • Information Offline
  • Posts: 1497
Re: Replacement parts
« Reply #3 on: December 10, 2011, 08:37:30 PM »
Scott is correct, they have tons of coaming pads from all different makes and models, I got a nice set (brand new) off white, with a gold accent panel, it has the rubber bead that slides into the piece already mounted on my boat, if I remember they were pretty cheap, and very nice.
Marc
1997 245 Osprey, 250 HPDI.  SOLD

December 10, 2011, 09:50:29 PM
Reply #4

Circle Hooked

  • Information Offline
  • Posts: 2130
    • http://www.theaquasportboatclub.com/index.php
Re: Replacement parts
« Reply #4 on: December 10, 2011, 09:50:29 PM »
I picked these up there, perfect fit, can't remember the price but Marc is right they were cheap.

Scott
1997 225 Explorer

December 10, 2011, 11:29:46 PM
Reply #5

pete

  • Information Offline
  • Posts: 1420
Re: Replacement parts
« Reply #5 on: December 10, 2011, 11:29:46 PM »
ditto was the guys said,I also dug through piles of those at MCL,there isnt any,if you have your old ones take to a canvas shop and get them recovered.the originals were pretty basic.good luck :salut:
2003  Osprey 225
Palm Bay FL

December 11, 2011, 09:54:27 AM
Reply #6

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Replacement parts
« Reply #6 on: December 11, 2011, 09:54:27 AM »
gator,
Another alternative is to pick up ones like Scott got, then have the center panel replaced with a blank white one...easy to do for a good seamstress...


Corner of 520 and A1A...

December 12, 2011, 06:00:47 PM
Reply #7

gatord413

  • Information Offline
  • Posts: 3
Re: Replacement parts
« Reply #7 on: December 12, 2011, 06:00:47 PM »
Scott, what is MCL ?

December 12, 2011, 06:09:38 PM
Reply #8

pete

  • Information Offline
  • Posts: 1420
Re: Replacement parts
« Reply #8 on: December 12, 2011, 06:09:38 PM »
2003  Osprey 225
Palm Bay FL

December 12, 2011, 06:16:19 PM
Reply #9

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Replacement parts
« Reply #9 on: December 12, 2011, 06:16:19 PM »
Quote from: "gatord413"
Scott, what is MCL ?

Ahh, grasshopper, you have much to learn... :wink:


Corner of 520 and A1A...

December 12, 2011, 06:23:18 PM
Reply #10

pete

  • Information Offline
  • Posts: 1420
Re: Replacement parts
« Reply #10 on: December 12, 2011, 06:23:18 PM »
good one Bob :P
2003  Osprey 225
Palm Bay FL

December 12, 2011, 06:30:51 PM
Reply #11

Circle Hooked

  • Information Offline
  • Posts: 2130
    • http://www.theaquasportboatclub.com/index.php
Re: Replacement parts
« Reply #11 on: December 12, 2011, 06:30:51 PM »
Scott
1997 225 Explorer

December 12, 2011, 07:44:09 PM
Reply #12

gatord413

  • Information Offline
  • Posts: 3
Re: Replacement parts
« Reply #12 on: December 12, 2011, 07:44:09 PM »
Thanks for the info guys and yes I do have much to learn.

December 12, 2011, 08:04:33 PM
Reply #13

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Replacement parts
« Reply #13 on: December 12, 2011, 08:04:33 PM »
Quote from: "gatord413"
Thanks for the info guys and yes I do have much to learn.

Sorry to give you some good natured chit, gator!  You'll find here, we try to help...and have a little fun at others expense, as well!  All in good fun, my friend, all in good fun...

But MCL is the cat's meow when it comes to AS parts...where are you located?


Corner of 520 and A1A...

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal