Attention: Have only 1 page to see today

Author Topic: Would Like to borrow a stock 1975 19-6 Console Cover  (Read 630 times)

August 28, 2011, 05:07:03 PM
Read 630 times

pbgsho

  • Information Offline
  • Posts: 6
Would Like to borrow a stock 1975 19-6 Console Cover
« on: August 28, 2011, 05:07:03 PM »
I have an retired acquaintance who does canvas work out of her home. Unfortunately she is unable to measure the console and fabricate a new cover. I would like to borrow a stock cover so she can measure it for my new cover. In return I will lend any or all of the AQ canvas including spray hood, clear windshield conector, side curtains , aft curtain amd privacy curtain. Please note the operative word is LEND not sell. Would prefer someone near Palm Beach Gardens, FL but I will travel to effect a transfer.
Does anyone know if Atlantic Canvas, formerly located at 1230 NE 8th Ave in Ft. Lauderdale has a successor? They were the suppliers for AQ canvas in the mid to late 70's. There is another Atlantic Canvas but does not have any association with the original company.

pbgsho

August 28, 2011, 05:23:44 PM
Reply #1

pete

  • Information Offline
  • Posts: 1420
Re: Would Like to borrow a stock 1975 19-6 Console Cover
« Reply #1 on: August 28, 2011, 05:23:44 PM »
what model boat? edit:ah,read the title,got it
2003  Osprey 225
Palm Bay FL

August 28, 2011, 05:36:51 PM
Reply #2

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11255
Re: Would Like to borrow a stock 1975 19-6 Console Cover
« Reply #2 on: August 28, 2011, 05:36:51 PM »
In the subject Pete.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

August 28, 2011, 05:38:39 PM
Reply #3

Blue Agave

  • Information Offline
  • Posts: 1495
Re: Would Like to borrow a stock 1975 19-6 Console Cover
« Reply #3 on: August 28, 2011, 05:38:39 PM »
Quote from: "pete"
what model boat?
Pete, I believe it's for a 1975 19-6 center console.  Revisit the title of the post.

sbgsho, I have a '75 19-6 but unfortunately I do not have a stock console.  Good luck!

1975 19-6
3.0 EFI Mercury 150 4S
"Don't count the days make the days count." - Muhammad Ali

September 01, 2011, 10:07:25 AM
Reply #4

pbgsho

  • Information Offline
  • Posts: 6
Re: Would Like to borrow a stock 1975 19-6 Console Cover
« Reply #4 on: September 01, 2011, 10:07:25 AM »
Solved my problem by going to the Marine Liquidators in Ft. Pierce where I found a large Sunbrella console cover which I believe I can cut down. Wife said to put it on inside out and mark where it needs to be stiched and she will sew it. It is so long that it will almost reach the floor so it will protect the teak doors on my console.
For anyone considering going you should allow at least 2 to 3 hours to see everything. It is a boaters toy store.

pbgsho

September 01, 2011, 12:20:16 PM
Reply #5

flounderpounder225

  • Information Offline
  • Posts: 1497
Re: Would Like to borrow a stock 1975 19-6 Console Cover
« Reply #5 on: September 01, 2011, 12:20:16 PM »
Quote from: "pbgsho"
Solved my problem by going to the Marine Liquidators in Ft. Pierce where I found a large Sunbrella console cover which I believe I can cut down. Wife said to put it on inside out and mark where it needs to be stiched and she will sew it. It is so long that it will almost reach the floor so it will protect the teak doors on my console.
For anyone considering going you should allow at least 2 to 3 hours to see everything. It is a boaters toy store.pbgsho

A few of us have had the experience, seems we all say the same thing for a summary :lol:
Marc
1997 245 Osprey, 250 HPDI.  SOLD

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal