Attention: Have only 1 page to see today

Author Topic: 1987 19'6" Osprey  (Read 1078 times)

February 23, 2005, 10:09:04 PM
Read 1078 times

GradySailfish25

  • Information Offline
  • Posts: 8
1987 19'6" Osprey
« on: February 23, 2005, 10:09:04 PM »
Ok, stupid question time.  This boat seems like the desk has a crown in it.  From the console back, about 4 inches from where the deck meets the sides of the boat it seem to drop off, on both sides.  The deck isn't soft, and I would think that if it had a stringer problem that are would be concave, not convex....any ideas?
Rick

February 24, 2005, 07:18:05 AM
Reply #1

Wilson

  • Information Offline
  • Posts: 209
(No subject)
« Reply #1 on: February 24, 2005, 07:18:05 AM »
That is probably true.  Many people lay up a floor so that it has a certain amount of camber.  This allows the water to roll to the sids and outh the back.
Wilson Ayala
Tampa, FL

February 18, 2006, 09:38:10 PM
Reply #2

scott_gunn

  • Information Offline
  • Posts: 186
(No subject)
« Reply #2 on: February 18, 2006, 09:38:10 PM »
I have the same year/style and the deck is crowned.  I'm pretty sure it's intentional to have the water drain to the edges and then the back.

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal