need a little help with teleflex gauges

[Mcdiver]

Since the revamp of the teleflex web site, all of the technical manuals are gone.  Does anyone out there have the technical manual on the install of the temperature gauge?  I have been working on the gauges in the boat and the wiring is not making sense.  I understand the light power and ground hook-ups, but I am confused on the S and I terminals.  I am assuming that the S terminal goes to the sensor and the I goes to the ignition power?  Can anyone confirm this for me so I don't blow up a nice set of gauges?

Thanks,

Mike

[seabob4]

Mike,
S=Sender
I=Ignition (switched)
G=Ground

Typically the water temp is a tan wire in the engine harness, no stripe...at least on OMC and Merc, go here for Jim Hebert's wondorous desciption of engine color coding...http://continuouswave.com/whaler/refere ... rCode.html

Oh, BTW, that revamp of the website is no faux paus.  Teleflex is no longer in the gauge business, that from my TF rep when I was at Proline...

[Mcdiver]

They must be using the auto meter gauges, i saw a press release saying they would continue to supply gauges.

Thanks on the designations though, I wanted to make sure before I hooked them up.

[PaulR]

Hi Mike, I am looking for a Teleflex MK27 tachometer for my 22-2 1975 Family Fisherman, can you tell me where you got your gauges? Mine works but the glass is cracked (after only 36 years!). I saw one on eBay used but the outside frame looked in rough shape. Any help appreciated!
Thanks,
PaulR

[seabob4]

They must be using the auto meter gauges, i saw a press release saying they would continue to supply gauges.

Thanks on the designations though, I wanted to make sure before I hooked them up.

I'm betting Faria will supply them.  Autometer is not in their price league...