Attention: Have 2 pages to see today

Author Topic: Hydraulic Steering  (Read 961 times)

February 25, 2011, 03:50:17 PM
Read 961 times

reeldrag

  • Information Offline
  • Posts: 31
Hydraulic Steering
« on: February 25, 2011, 03:50:17 PM »
Hello All,
I plan to convert from cable steering to hydraulic. From what I have found it is either Teleflex or Uflex. Price is about the same +/- $150. Which do you think is the better system?
Thanks,
Curt

February 25, 2011, 06:39:23 PM
Reply #1

Capt Matt

  • Information Offline
  • Master Rebuilder
  • Posts: 791
    • http://www.captmattmitchell.com
Re: Hydraulic Steering
« Reply #1 on: February 25, 2011, 06:39:23 PM »
I've only ever used the Sea Star, don't know too much about the other
If you get the seastar don't get a tilt helm it gets loose and blows the seals
Capt Matt
www.captmattmitchell.com
Light tackle sportfishing

February 25, 2011, 07:53:46 PM
Reply #2

akbridge

  • Information Offline
  • Posts: 260
Re: Hydraulic Steering
« Reply #2 on: February 25, 2011, 07:53:46 PM »
I have a Baystar system.  It has held up well.  It was easy to set up.  And it can be bought cheap on Ebay.  I would suggest it.  I have no idea about Uflex.  Good luck.

February 26, 2011, 03:01:03 AM
Reply #3

fitz73222

  • Information Offline
  • Mechanical Master
  • Posts: 1957
    • http://www.hudson-technologies.com/.
Re: Hydraulic Steering
« Reply #3 on: February 26, 2011, 03:01:03 AM »
Teleflex manufactures Seastar and Baystar systems. The Baystar is a lighter duty system for < 150HP. I have a Baystar system on my flats boat on a 60 Bigfoot Merc for 7 years and a Seastar on my 22-2 with twin 115 Mercs for 16 years and both have been extremely reliable. I just now had to replace the Seastar's first helm seal since new. The Uflex (I believe Ultraflex) I only had experiance with a standard mechanical helm and it was a POS had the steering cable break at only 4 years old; hence the Baystar install.
1973 Aquasport 22-2, twin 115 Mercs
2000 Baycraft 175 flats boat, 60 Bigfoot Merc
1968 Boston Whaler 13, 25 Yamaha (project)
1966 Orlando Clipper 13, 9.9 Merc

February 26, 2011, 07:17:25 AM
Reply #4

Mcdiver

  • Information Offline
  • Posts: 203
Re: Hydraulic Steering
« Reply #4 on: February 26, 2011, 07:17:25 AM »
From an install standpoint, the sea star was incredibly easy.  Has also been a pleasure on the water.  Would not own another boat without it.
Mike

March 01, 2011, 07:13:43 PM
Reply #5

reeldrag

  • Information Offline
  • Posts: 31
Re: Hydraulic Steering
« Reply #5 on: March 01, 2011, 07:13:43 PM »
Thanks for your imput guys, going with the teleflex.
Curt

March 01, 2011, 09:14:40 PM
Reply #6

Treefish

  • Information Offline
  • Posts: 121
    • http://www.youtube.com/watch?v=rMj9hRafqyQ
Re: Hydraulic Steering
« Reply #6 on: March 01, 2011, 09:14:40 PM »
I recently put the Baystar system on my 19-6 that I've got a 150hp 1996 Johnson Ocean Runner on the back of.  So far so good. It took me about 3 hours from the time it arrived to the time it was all installed and purged.  That includes the time it took to unhook the old system and drill new holes for the helm. I've used the boat on 3 different occasions since installation and have no complaints.  
Only problem now is that I don't get the same forearm workout I used to with my mechanical steering.  

http://www.teleflexmarine.com/products/ ... 4-compact/

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal