Attention: Have only 1 page to see today

Author Topic: Johnson 70 on 170?  (Read 1165 times)

November 20, 2005, 10:17:22 PM
Read 1165 times

Mr. Osprey

  • Information Offline
  • Posts: 113
Johnson 70 on 170?
« on: November 20, 2005, 10:17:22 PM »
There are a couple of 70hp Johnson motors that I'm looking at from a local dealer. They want $3500 for a 1998 and $4000 for a 2000. Any thoughts on the motors? Will it be enough to ski, tube, and wakeboard? Is the price to steep for that engine? Any performance data reguading this engine and a 84' 170 Osprey? Any input is appreciated.
Mr. Osprey

1971 Mako 17 Angler
1986 Evinrude 88 SPL

November 20, 2005, 10:42:44 PM
Reply #1

DoOver

  • Information Offline
  • Posts: 17
(No subject)
« Reply #1 on: November 20, 2005, 10:42:44 PM »
When I bought my boat it had a Johnson 65 on it. I liked the engine, it had plenty of power for fishing. Those newer Johnsons are both carburated? Don't sound bad to me.
Brian
72  170 Aquasport
140 Johnson Sold I\'m Hating It!

November 21, 2005, 05:28:06 AM
Reply #2

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
(No subject)
« Reply #2 on: November 21, 2005, 05:28:06 AM »
Are these totally rebuilt motors?  If not, the price is too high.  I'd look for someone that rebuilds. I just bought a totally rebuilt (head sent to machine shop) '98 Johnson 115 for $3895 and it had a 1 year mechanical AND electrical warranty.  Looking at my motor, outside and under the cowl, you'd swear it was new. As far as HP, IMO go for a bigger motor, I think you'd like a little more HP than a 70.  8)
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

November 22, 2005, 07:12:19 AM
Reply #3

Radioshop

  • Information Offline
  • Posts: 167
(No subject)
« Reply #3 on: November 22, 2005, 07:12:19 AM »
My humble opinion is that a 70 is a little light duty for what you want to do.  You're better off with a 90 Yamaha, I think.  You could get a nice used one for about what they're asking for those OMC's.  It's better to have it and not use than to need it and not have it.
1973 22.2 Osprey - Sand Bar II
Miamuh, Florida

November 23, 2005, 03:32:38 PM
Reply #4

Mr. Osprey

  • Information Offline
  • Posts: 113
(No subject)
« Reply #4 on: November 23, 2005, 03:32:38 PM »
thanks guys, I think I'm gonna pass them up
Mr. Osprey

1971 Mako 17 Angler
1986 Evinrude 88 SPL

November 23, 2005, 07:53:47 PM
Reply #5

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
(No subject)
« Reply #5 on: November 23, 2005, 07:53:47 PM »
Quote from: "arc-tek marine"
hi osprey, sounds high for the year...there is a place in waterford ct that does total rebuild  late model ob' s, with a warranty, i was quoted 4600.00 for a late model 150 hp johnson which i thought was pretty good.. the web page www.outboardexchange.com ...jim  good luck :D

I also think that's the way to go and I guess it's a little closer than the guy I bought from.  :wink:
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal