Attention: Have 2 pages to see today

Author Topic: Prisma Preform stringer  (Read 1280 times)

January 23, 2010, 11:01:05 AM
Read 1280 times

Marcq

  • Information Offline
  • Posts: 600
Prisma Preform stringer
« on: January 23, 2010, 11:01:05 AM »
As anyone heard about Prisma product?
http://www.jamestowndistributors.com/us ... e+Preforms

There's a guy with a Mako at SurfTalk redoing his stringer with that product, looks interesting, going to keep an eye on this
 
http://www.stripersonline.com/surftalk/ ... 401&page=4


Marc..
1979 170 Aquasport 70hp Evinrude

January 23, 2010, 06:04:41 PM
Reply #1

slvrlng

  • Information Offline
  • Posts: 1817
Re: Prisma Preform stringer
« Reply #1 on: January 23, 2010, 06:04:41 PM »
Its a pretty good idea if you want to save time and you're not very good at laminating.
Lewis
       1983 222 Osprey "Slipaway"
       1973 19-6 "Emily Lynn"
      

January 23, 2010, 09:05:36 PM
Reply #2

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Prisma Preform stringer
« Reply #2 on: January 23, 2010, 09:05:36 PM »
Marc,
Check out this thread on reelboating.com from my good friend Scott with Compsys (Prisma).

http://reelboating.com/forums/index.php?/topic/3552-98-pathfinder-stringer-job/

See what you think...


Corner of 520 and A1A...

January 24, 2010, 10:48:20 AM
Reply #3

Marcq

  • Information Offline
  • Posts: 600
Re: Prisma Preform stringer
« Reply #3 on: January 24, 2010, 10:48:20 AM »
Quote from: "seabob4"
Marc,
Check out this thread on reelboating.com from my good friend Scott with Compsys (Prisma).

http://reelboating.com/forums/index.php?/topic/3552-98-pathfinder-stringer-job/

See what you think...
Holly molly only 3 pages but that was a long read, sure learned a lot about that product and boat building . I wasn't sure at the beginning of the thread, Cracker Larry had valid points(wonder if it's the same larry at bateau2) but that Scott guy sure knows is stuff
Thanks Seabob, that was very informative  :thumleft:

Marc..
1979 170 Aquasport 70hp Evinrude

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal