Welcome, Guest
Login
Register
Search
Home
Forum
Help
Site Rules
Advertise
Login
Register
Menu
Home
Forum
Help
Site Rules
Advertise
Login
Register
Classic AquaSport
/
Aquasport Model Rebuilds, Mods, Updates and Refreshes
/
Osprey Style Hull Rebuilds
/
165/170/175 Rebuilds
/
Foam in the 170?
Attention: Have only 1 page to see today
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: Foam in the 170? (Read 914 times)
May 19, 2008, 01:36:02 PM
Read 914 times
Marcq
Information
Posts:
600
Foam in the 170?
«
on:
May 19, 2008, 01:36:02 PM »
Just wondering, is there foam just inside the stringer in my boat ?
Marc..
Logged
1979 170 Aquasport 70hp Evinrude
May 19, 2008, 08:43:49 PM
Reply #1
scyharris
Information
Posts:
15
(No subject)
«
Reply #1 on:
May 19, 2008, 08:43:49 PM »
When I had the innerliner tore out to replace the transom in my 1984 17', the only place that was foamed were the inside of the stringers and a little between the hull and liner. The rest is absolutely wide open! Hope that helps.
Logged
May 20, 2008, 02:02:29 AM
Reply #2
Marcq
Information
Posts:
600
(No subject)
«
Reply #2 on:
May 20, 2008, 02:02:29 AM »
Thanks, wasn't sure if there was some on each side of the stringers
Marc..
Logged
1979 170 Aquasport 70hp Evinrude
May 21, 2008, 08:59:42 AM
Reply #3
MJB
Information
Master Rebuilder
Posts:
95
(No subject)
«
Reply #3 on:
May 21, 2008, 08:59:42 AM »
My 1976 170 had foam on the inside of the stringers and on the outside of the stringers between the stringer and outer hull the entire length of the boat. Not sure about the 1979 model year.
Logged
Mike
AB, NC
1976 Aquasport 170
1988 MAKO 285
Print
Pages:
1
Go Up
« previous
next »
Classic AquaSport
/
Aquasport Model Rebuilds, Mods, Updates and Refreshes
/
Osprey Style Hull Rebuilds
/
165/170/175 Rebuilds
/
Foam in the 170?
SimplePortal 2.3.5 © 2008-2012, SimplePortal