Welcome, Guest
Login
Register
Search
Home
Forum
Help
Site Rules
Advertise
Login
Register
Menu
Home
Forum
Help
Site Rules
Advertise
Login
Register
Classic AquaSport
/
Aquasport Model Rebuilds, Mods, Updates and Refreshes
/
Osprey Style Hull Rebuilds
/
191 Rebuilds
/
New project 19-1
Attention: Have only 1 page to see today
« previous
next »
Print
Pages:
1
2
Go Down
Author
Topic: New project 19-1 (Read 3350 times)
May 26, 2010, 08:40:00 PM
Reply #15
J.W.D.
Information
Posts:
6
Re: New project 19-1
«
Reply #15 on:
May 26, 2010, 08:40:00 PM »
Oh and the cap I'm pretty sure isnt original. It looks like they glassed a PVC pipe to the inside edge. From the looks of the pictures you just sent and the ones I've seen in the brochures that edge is more square. I would have loved to have an original cap but what I have seems pretty solid though so maybe I can cut that round piece off and maybe just do a smooth cap all the way around. I'm hoping anyway.
Logged
May 26, 2010, 09:59:23 PM
Reply #16
dbiscayne
Information
Posts:
303
Re: New project 19-1
«
Reply #16 on:
May 26, 2010, 09:59:23 PM »
Yep thats mine, still under construction but it's going back the way it came from the factory. I got lucky & found an un-molested boat, but the foam in the stringers was wet & the wood core of the deck was literally gone.
I think the lip at the edge of the cap helps stiffen up that edge, might need something there.
This one isn't mine, found it on the web, a 1969 19-1 in front of the Sailfish Marina sometime around 1970. Check out the flip flop seat.
Logged
May 27, 2010, 09:21:16 AM
Reply #17
Skoot
Information
Posts:
484
Re: New project 19-1
«
Reply #17 on:
May 27, 2010, 09:21:16 AM »
Heres some pics for ya that should help alot.
http://www.classicaquasport.com/phpbb3/ ... f=6&t=5165
Im almost positive this is the original config. I spoke with this guy before he sold it and he said the boat has been in his family since it was new. If you can get to his photo bucket, he had a ton of pics in it.
Good luck
Logged
Scott
1975 19-6 - 90hp Tohatsu
May 27, 2010, 09:32:00 AM
Reply #18
fitz73222
Information
Mechanical Master
Posts:
1957
Re: New project 19-1
«
Reply #18 on:
May 27, 2010, 09:32:00 AM »
Check out the 68` or 69` electric shift 55 Evinrude pushing her. I knew those motors like the back of my hand. We would cringe everytime we saw one pull up to the dealership! Late 60`s Motorola "electronic ignition" and that fabulous electric shift gearcase! Not everything was better in the old days!!
Logged
1973 Aquasport 22-2, twin 115 Mercs
2000 Baycraft 175 flats boat, 60 Bigfoot Merc
1968 Boston Whaler 13, 25 Yamaha (project)
1966 Orlando Clipper 13, 9.9 Merc
May 27, 2010, 04:10:51 PM
Reply #19
dbiscayne
Information
Posts:
303
Re: New project 19-1
«
Reply #19 on:
May 27, 2010, 04:10:51 PM »
I believe there was a 19-1 Gull and a 19-1 Osprey model, I know for sure mine is a 19-1 Gull, says so on the bottom of the console tray! and it has the console mounted forward up against the casting deck, must have been the Osprey model that had the console in the more traditional spot, along with the rigging channel under the deck. My deck was completely closed, with the rigging running along the bottom of the starboard side cap.
Logged
May 29, 2010, 11:12:39 AM
Reply #20
J.W.D.
Information
Posts:
6
Re: New project 19-1
«
Reply #20 on:
May 29, 2010, 11:12:39 AM »
That's cool to know about the console difference on the Gull and Osprey. The only other difference that I found was that the Gull had a bigger gas tank tank.
http://www.classicaquasport.com/gallery ... 570/page/1
Logged
Print
Pages:
1
2
Go Up
« previous
next »
Classic AquaSport
/
Aquasport Model Rebuilds, Mods, Updates and Refreshes
/
Osprey Style Hull Rebuilds
/
191 Rebuilds
/
New project 19-1
SimplePortal 2.3.5 © 2008-2012, SimplePortal