Attention: Have 2 pages to see today

Author Topic: Question about coosa  (Read 570 times)

December 29, 2007, 05:13:01 PM
Read 570 times

Peter M.

  • Guest
Question about coosa
« on: December 29, 2007, 05:13:01 PM »
Does coosa board have to be glassed over for example for new deck or does just the seams need to be taped

December 30, 2007, 10:06:28 AM
Reply #1

LilRichard

  • Information Offline
  • Master Rebuilder
  • Posts: 1244
(No subject)
« Reply #1 on: December 30, 2007, 10:06:28 AM »
Needs to be glassed.

December 30, 2007, 06:06:10 PM
Reply #2

71flatback

  • Information Offline
  • Posts: 94
(No subject)
« Reply #2 on: December 30, 2007, 06:06:10 PM »
I've used it to make a box to put a vhf in on the shrimp boat. I glassed the surfaces and left the edges exsposed. It doesn't absorb water but if your not careful it will chip. i wouldn't use it on a floor without it being glassed
1971 aquasport 22-2 flatback, Work in progress

December 31, 2007, 01:57:53 PM
Reply #3

Seadog

  • Information Offline
  • Posts: 223
(No subject)
« Reply #3 on: December 31, 2007, 01:57:53 PM »
Take care if you cut the stuff.  

The dust feels like you stuck your hand in a bucket of needles.
1970 Aquasport 222
Spring Hill, Fl.
Should spash her in the summer.
Just don\'t know which summer.

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal