Welcome, Guest
Login
Register
Search
Home
Forum
Help
Site Rules
Advertise
Login
Register
Menu
Home
Forum
Help
Site Rules
Advertise
Login
Register
Classic AquaSport
/
Aquasport Model Rebuilds, Mods, Updates and Refreshes
/
Generic Aquasport Rebuilding Topics
/
Mask & goggles for grinding
Attention: Have 2 pages to see today
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: Mask & goggles for grinding (Read 1675 times)
April 08, 2007, 06:01:39 PM
Read 1675 times
JimCt
Information
Posts:
1848
Mask & goggles for grinding
«
on:
April 08, 2007, 06:01:39 PM »
Anybody have recommendations for a good mask & goggle combo for grinding? Goggles I'm using collect dust inside plus fog up so I have to stop every minute or so, take them off and wipe them out. They are the semi-soft type which contact skin all around to theoretically seal out dust which doesn't work worth a @#$%. Mask is the disposable paper type. Tried using Rain-X on the goggles but doesn't help much.
Logged
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22
April 08, 2007, 08:04:42 PM
Reply #1
LilRichard
Information
Master Rebuilder
Posts:
1244
(No subject)
«
Reply #1 on:
April 08, 2007, 08:04:42 PM »
I'm using a 3M respirator with disposable particulate filters... works well. I have no suggestions on goggles, mine suck too.
Logged
April 08, 2007, 08:27:00 PM
Reply #2
rburlington
Guest
(No subject)
«
Reply #2 on:
April 08, 2007, 08:27:00 PM »
My mask is an AOSaftey purchased for $36.00 from Lowes. It works well and you can change the 2 filters according to the type of materials you are working with.
My goggles are hopeless; they steam up and allow some dust as well.
RGB
Logged
April 08, 2007, 09:06:57 PM
Reply #3
damnitbadger
Information
Posts:
137
(No subject)
«
Reply #3 on:
April 08, 2007, 09:06:57 PM »
It's gross but if you spit on the inside lens and rub it around with a tissue till clear they won't fog any more. Works with a dive mask as well.
Logged
Beware the lolipop of mediocrity, lick it once and you will suck forever!
88\' CCP 222 w/200 EFI Merc
April 09, 2007, 08:48:51 AM
Reply #4
JimCt
Information
Posts:
1848
(No subject)
«
Reply #4 on:
April 09, 2007, 08:48:51 AM »
Have tried spit, Rain-X, detergent, Downy dryer sheets & WD-40 with no luck.
Logged
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22
April 09, 2007, 08:19:10 PM
Reply #5
John Jones
Information
Posts:
2829
(No subject)
«
Reply #5 on:
April 09, 2007, 08:19:10 PM »
The only help I have found with goggles is a big fan. The neighbors replaced their central heat & air and I salvaged the big squirrel cage blower from the unit. I mounted it on a piece of plywood and put a long cord on it. I try to aim the fan where it's blowing most of the crap away from me. It does delay having to clean the goggles and helps the fogging also.
Logged
Politics have no relation to morals.
Niccolo Machiavelli
April 09, 2007, 08:42:36 PM
Reply #6
JimCt
Information
Posts:
1848
(No subject)
«
Reply #6 on:
April 09, 2007, 08:42:36 PM »
Found these on Ebay & bought a pair.
Gov't. issue goggles good for sandstorms so they say. Look like regular garden-variety ski goggles to me. Will try a directed fan too & report results.
Logged
JimCT
------
\'74 22-2 inboard
HIN:ASPL0953M74J
Chrysler 318
------
\'74 Marshall 22
November 14, 2008, 10:58:12 PM
Reply #7
love2fish
Information
Posts:
638
(No subject)
«
Reply #7 on:
November 14, 2008, 10:58:12 PM »
I used to use the wet wipes, like you get at a restaurant with wings or crab legs, to wipe the inside/outside of my ice hockey mask. If you clean the goggles, and then wipe the lens with the wet nap, let it kinda haze over, then lightly buff off the hazing with a tissue, it should keep the fogging down.
Logged
Chris
\'74 22-2
Member #921
November 20, 2008, 03:18:00 PM
Reply #8
MarshMarlowe196
Information
Posts:
976
(No subject)
«
Reply #8 on:
November 20, 2008, 03:18:00 PM »
I actually bought some stuff in a bottle from a dive shop several years ago that was made to prevent fogging on dive goggles. Worked pretty good. I would check your local dive shop
Logged
Key West 1720 / Yam C90
Sold: 1973 Aquasport 19-6
Print
Pages:
1
Go Up
« previous
next »
Classic AquaSport
/
Aquasport Model Rebuilds, Mods, Updates and Refreshes
/
Generic Aquasport Rebuilding Topics
/
Mask & goggles for grinding
SimplePortal 2.3.5 © 2008-2012, SimplePortal