Attention: Have 2 pages to see today

Author Topic: ethanol fuel in 1995 johnson 130  (Read 186 times)

September 04, 2020, 02:38:27 PM
Read 186 times

long john

  • Information Offline
  • Posts: 3
ethanol fuel in 1995 johnson 130
« on: September 04, 2020, 02:38:27 PM »
hello everyone, I have a 1995 auquasport 200 that came with 1995 johnson 130, and I replaced all of the fuel lines and fuel pump recently, i also have a plastic built in gas tank that is about 45 gallons, I was wondering if I ought to use ethanol free gas from wawa or just use regular gas? my brother had a e-tec motor that a fuel injector failed because of a piece of rubber clogged it, but mine is a carburated motor so I dont feel like the degradation of the fuel line should hurt.  thanks in advance,   long john

September 04, 2020, 03:09:15 PM
Reply #1

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Re: ethanol fuel in 1995 johnson 130
« Reply #1 on: September 04, 2020, 03:09:15 PM »
Don't use ethanol fuel!  It's not just the engine - it will gel in the fuel tank also.  Just... Don't do it!

https://www.youtube.com/watch?v=ZKhqL3xS0Dw 

 :danceSm: :danceSm: :danceSm:
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209


September 05, 2020, 07:02:47 AM
Reply #2

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11283
Re: ethanol fuel in 1995 johnson 130
« Reply #2 on: September 05, 2020, 07:02:47 AM »
Wawa sells non-ethanol gas (at least here in FL). Ethanol is a solvent and will start eating everything up.  Plus it attracts water.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal