Menu

Attention: Have 2 pages to see today
« previous next »
Pages: 1   Go Down

Author Topic: RE Wire Project  (Read 480 times)

May 27, 2016, 10:34:48 PM
Read 480 times

snakeoil

  • Information Offline
  • Posts: 25
RE Wire Project
« on: May 27, 2016, 10:34:48 PM »
I am going to re wire my 170 Osprey while its being renewed (gas tank etc)...what gauge and what is best?...This will be for bilge pump and lighting...any good place to buy wire?
Logged
Deo Vindace!
May 28, 2016, 06:14:55 AM
Reply #1

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11278
Re: RE Wire Project
« Reply #1 on: May 28, 2016, 06:14:55 AM »
Try Greg's marine wire - http://gregsmarinewiresupply.com/  They are quick and reasonable - wire is expensive anyway.  I bought all the wire for my rebuild from them.
You can use 16 ga for lights.  If you buy bilge wire from them its 14ga.  If you want to pull new main wires from battery to terminal blocks you might use 8 ga.
Logged
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha
August 28, 2016, 01:01:34 PM
Reply #2

snakeoil

  • Information Offline
  • Posts: 25
Re: RE Wire Project
« Reply #2 on: August 28, 2016, 01:01:34 PM »
 :2Cents:   Got all wiring pre tested, and works all the electrical including the manual bilge....Now all I have to do is bundle it under the console....all plug and play....!
Logged
Deo Vindace!
Pages: 1   Go Up
« previous next »
 

SimplePortal 2.3.5 © 2008-2012, SimplePortal