Attention: Have 2 pages to see today

Author Topic: Galvanize Drums or NOT for Salt Water  (Read 354 times)

April 08, 2015, 01:48:06 PM
Read 354 times

czizza

  • Information Offline
  • Posts: 105
    • http://www.dmtinc.com
Galvanize Drums or NOT for Salt Water
« on: April 08, 2015, 01:48:06 PM »
Do you guys recommend Galvanized Drums for salt water only? I will trailer from my home to boat ramp on weekends.

The original owner removed the brakes from the trailer, so I have bought new brake kits (all galvanized) to replace my existing setup. However, the drums were not available. I found them online for $60 for regular and $120 for galvanized. They are double the cost.

If I don't go galvanized how long do you think the drums will last ... the ones I took off were 2 years old from my inheritance so I am not sure how old they were to the original owner.

The non-galvanized units I have are horrible.

Here is the old units:



April 08, 2015, 02:12:58 PM
Reply #1

fitz73222

  • Information Offline
  • Mechanical Master
  • Posts: 1957
    • http://www.hudson-technologies.com/.
Re: Galvanize Drums or NOT for Salt Water
« Reply #1 on: April 08, 2015, 02:12:58 PM »
It would be logical to assume that the galvanized drums last twice as long as the plain iron, hence double the price. Of course the boating season in your neck of the woods is much shorter than down here in Florida so with a good flushing after each use I would say 3-4 years. Drum brakes down here aren't worth their weight in scrap value and we choose stainless disc brakes because it is a necessity unless you're into living under your trailer doing repairs.
1973 Aquasport 22-2, twin 115 Mercs
2000 Baycraft 175 flats boat, 60 Bigfoot Merc
1968 Boston Whaler 13, 25 Yamaha (project)
1966 Orlando Clipper 13, 9.9 Merc

April 09, 2015, 10:40:52 AM
Reply #2

gman 82 aquasport

  • Information Offline
  • Master Rebuilder
  • Posts: 594
Re: Galvanize Drums or NOT for Salt Water
« Reply #2 on: April 09, 2015, 10:40:52 AM »
Agree with fitz on this one, stainless disc is the way to go. Have had mine on for 3 years now and tow the boat around 3k miles each season, still have the original pads in place (not even half worn) and the disc still are straight(no warping). biggest thing is getting used to the reverse lookout.
1982 19-6 Osprey
1992 Johnson 150
"THERAPY"
Member # 2331

April 10, 2015, 03:48:03 PM
Reply #3

czizza

  • Information Offline
  • Posts: 105
    • http://www.dmtinc.com
Re: Galvanize Drums or NOT for Salt Water
« Reply #3 on: April 10, 2015, 03:48:03 PM »
Thanks for all of the advice ... however at the moment I will continue with the drums the original owner did a number so let me get the trailer back to working then I can go down the road of modifying or selling it for better ... it will be easier to sell with working breaks.

Some eye candy of the old drums ... I will post up the new ones soon.

 



Nasty!!

April 10, 2015, 04:23:27 PM
Reply #4

fitz73222

  • Information Offline
  • Mechanical Master
  • Posts: 1957
    • http://www.hudson-technologies.com/.
Re: Galvanize Drums or NOT for Salt Water
« Reply #4 on: April 10, 2015, 04:23:27 PM »
Funny how its all about the oxygen. Throw that thing out in the water and it will be there in one piece 20 years from now and look about same!
1973 Aquasport 22-2, twin 115 Mercs
2000 Baycraft 175 flats boat, 60 Bigfoot Merc
1968 Boston Whaler 13, 25 Yamaha (project)
1966 Orlando Clipper 13, 9.9 Merc

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal