Attention: Have 2 pages to see today

Author Topic: New steering 03 175  (Read 413 times)

October 13, 2014, 07:29:21 PM
Read 413 times

J Mac

  • Information Offline
  • Posts: 12
New steering 03 175
« on: October 13, 2014, 07:29:21 PM »
I have a 2003 17.5 aquasport with a 90 hp yamaha. I need to replace my steering cable. Any idea what cable would be best for this boat. Is this a job that I could do myself. Any idea of the ballpark price to install a new steering cable
Thanks
John

October 14, 2014, 04:59:22 AM
Reply #1

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11283
Re: New steering 03 175
« Reply #1 on: October 14, 2014, 04:59:22 AM »
Hi J Mac,
You can certainly change out the steering cable yourself.  Hardest part is getting it out of the tube at the engine.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

October 14, 2014, 07:52:37 AM
Reply #2

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: New steering 03 175
« Reply #2 on: October 14, 2014, 07:52:37 AM »
I did a Baystar install on a 175 a couple months ago, so obviously had to remove the old cable.  The good news is I could pull the cable out of the tilt tube without having to remove the engine from the transom (a common issue on smaller boats).  It's tight, but definitely doable.

Replace the old with a Teleflex QCII cable, the P/N on the old cable should be stamped in the jacket of the old cable.  The last 2 digits are the cable length in feet.  I get all my cables from boatersland.com, have been for years...http://www.boatersland.com/enginesystem ... lqcii.html


Corner of 520 and A1A...

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal