Need a new sender unit for fuel tank

[slvrlng]

Should be. Just don't lose any of the screws!

[icemanbryan]

OK, pulled the sending unit this afternoon.
I measured 18 1/2 inches to the top of the tank.
So going by what I am told, I need a 17 inch sending unit, yeah?

From their FAQs on their website:
Q: How do I determine the length of the sender I need?
For Fuel/Water senders, the length should be 1" less than the depth of the tank if tank is plastic, and 0.5" less than the depth of the tank if tank is metal. This is to account for possible tank flex.

Who has a good stock of these, I am looking on the web but having a problem finding the size?
Need 16.5 or possible 17"

http://www.wemausa.com/

Great, I got it ordered up.
Thanks!

[icemanbryan]

Should be. Just don't lose any of the screws!

I hear that.
I had the dock install new screws,
 I also purchased an extra set!

[Bergertime]

Yes - My stock tank (245 Osprey) was the standard five hole pattern and the WEMA fit perfectly.


-Bruce

[icemanbryan]

Got it ordered up and man, they are quick.
Already shipped out w UPS tracking.
Solid company for sure

Thanks for all the help, I appreciate it!

Bryan