Attention: Have 2 pages to see today

Author Topic: Minn Kota Trim and Troll  (Read 871 times)

January 10, 2016, 03:23:11 PM
Read 871 times

wthoward19

  • Information Offline
  • Posts: 10
Minn Kota Trim and Troll
« on: January 10, 2016, 03:23:11 PM »
Purchase a boat last summer with the now obsolete Minn Kota Trim and Troll system. Great idea, horrible product. Minn Kota no longer supports or produces parts.

Looking for Auxillary is 2994057 (minn kota AUX TCD ASSEMBLY) for trim tab control up top. The switch is bad. Had to replace the lower switch too, that part is pretty easy to find but the top switch is a different part and they are not interchangeable.

Also, have yet to get the trolling motors to turn. I've replaced the control box (black box) and the remote control. There is a beep indicating the remote has been recognized and the motors have power but will not turn blades.

Anyone have experience with this system or have the system and it works? Also, if someone has the auxillary switch laying around, I'l love to make a deal.

Brangler

January 10, 2016, 05:28:48 PM
Reply #1

Aswaff400

  • Information Offline
  • Master Rebuilder
  • Posts: 1627
Re: Minn Kota Trim and Troll
« Reply #1 on: January 10, 2016, 05:28:48 PM »
a friend of mine has a complete system with one new motor that he will be selling soon off his 24 Gause. not sure when...
Aaron
1996 200 Osprey SOLD
1968 22-2 Flatback SOLD
1993 210 Explorer SOLD
1991 Fountain 31TE SOLD
1989 Fountain 12-meter SOLD
1992 Talon F-20 SOLD
2021 Fountain 38TE QUAD 400's

January 10, 2016, 07:06:27 PM
Reply #2

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11267
Re: Minn Kota Trim and Troll
« Reply #2 on: January 10, 2016, 07:06:27 PM »
Wow - what electrical is going to the combo?  Can you figure out what is going to the tab and what is going to the trolling motor?  I wouldn't think that there is much going there, maybe a pair of wires each and somewhere else are some relays to reverse the polarity on the motors of each.
Should be easy to troubleshoot but you have take it a little at a time - make sure the tabs work by bypassing the relays and do the same for the trolling motors.  If they work bypassed then it's time to focus on the controls.
You can make any controls work for your system once you understand it - it's just controlling relays - so you can replace the uppers with a generic one.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

January 11, 2016, 11:05:47 AM
Reply #3

wthoward19

  • Information Offline
  • Posts: 10
Re: Minn Kota Trim and Troll
« Reply #3 on: January 11, 2016, 11:05:47 AM »
Great advice Rick and much appreciated. I'm still working through them and while not my strong suit, your advice is helpful.
 
@Aswaff400, very interested to talk with your friend, I'd like to secure parts to keep the system running long term once I get it operational...

Can you PM me with contact information or you can email me at wthoward19@gmail.com

January 11, 2016, 11:58:39 AM
Reply #4

wthoward19

  • Information Offline
  • Posts: 10
Re: Minn Kota Trim and Troll
« Reply #4 on: January 11, 2016, 11:58:39 AM »
By the way, the tabs work, just not the motors... I'd love to have another motor to test motor failure. Seems unlikely that both would fail.

January 11, 2016, 05:06:50 PM
Reply #5

RickK

  • *****
  • Information Offline
  • Administrator
  • Posts: 11267
Re: Minn Kota Trim and Troll
« Reply #5 on: January 11, 2016, 05:06:50 PM »
Seems unlikely that both would fail. 

Agreed.
Rick
1971 "170" with 115 Johnson (It's usable but not 100% finished)

1992 230 Explorer with 250 Yamaha

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal