Attention: Have 2 pages to see today

Author Topic: Gas Shock Mounts for Seat (Suggestions?)  (Read 689 times)

January 07, 2013, 11:21:05 AM
Read 689 times

Bergertime

  • Information Offline
  • Posts: 329
Gas Shock Mounts for Seat (Suggestions?)
« on: January 07, 2013, 11:21:05 AM »
Hello AS Experts!  :salut:

Reaching out to the team to see if anyone knows where to find replacement mounts for the gas shocks that lift and hold open the seat in the front of my consol.  Anyone swap out theirs or find a good replacement and/or an exact match?  Pics of the rusty buggers below.   Please advise.






-Bruce
98 245 Osprey / Johnson 225

January 07, 2013, 12:06:38 PM
Reply #1

Blue Agave

  • Information Offline
  • Posts: 1495
Re: Gas Shock Mounts for Seat (Suggestions?)
« Reply #1 on: January 07, 2013, 12:06:38 PM »
Take the old ones to any aluminum shop and have them make new ones.

1975 19-6
3.0 EFI Mercury 150 4S
"Don't count the days make the days count." - Muhammad Ali

January 07, 2013, 12:11:00 PM
Reply #2

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Gas Shock Mounts for Seat (Suggestions?)
« Reply #2 on: January 07, 2013, 12:11:00 PM »
While the mounts, as Nando said, can be fabbed by any metal shop, I'd consider replacing the struts as well.  I recommend Ameritool...http://www.ameritoolmfg.com/

I can get a pic of the struts on the Scarab I have at the house, same struts as yours...


Corner of 520 and A1A...

January 07, 2013, 12:32:53 PM
Reply #3

flounderpounder225

  • Information Offline
  • Posts: 1497
Re: Gas Shock Mounts for Seat (Suggestions?)
« Reply #3 on: January 07, 2013, 12:32:53 PM »
Did mine on the 245 after I got her, looked the same as yours.  here is the thread on it, mine are still looking and working good after 3+ years on the boat..
viewtopic.php?f=1&t=3661&p=61179&hilit=struts#p61179
Marc
1997 245 Osprey, 250 HPDI.  SOLD

January 07, 2013, 12:45:01 PM
Reply #4

wingtime

  • Information Offline
  • Posts: 3581
    • http://50newtmotorclub.shutterfly.com/
Re: Gas Shock Mounts for Seat (Suggestions?)
« Reply #4 on: January 07, 2013, 12:45:01 PM »
Fernando is on the right track about making them out of aluminum angle...  one thing I cannot see is the backside of the ball joint... is that bolted thru the angle or is it welded to it?
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90

January 07, 2013, 01:03:14 PM
Reply #5

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6446
Re: Gas Shock Mounts for Seat (Suggestions?)
« Reply #5 on: January 07, 2013, 01:03:14 PM »
Quote from: "seabob4"
 I recommend Ameritool...http://www.ameritoolmfg.com/

Agreed.
They supplied the new ones for my cabin hatch on the 210 WAC.
They have the brackets you need also.
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

January 07, 2013, 01:14:47 PM
Reply #6

pete

  • Information Offline
  • Posts: 1420
Re: Gas Shock Mounts for Seat (Suggestions?)
« Reply #6 on: January 07, 2013, 01:14:47 PM »
taylor made makes a stainless replacement bracket

http://www.westmarine.com/webapp/wcs/st ... sNum=50683

also west has the struts too
http://www.westmarine.com/webapp/wcs/st ... sNum=50683


or in stainless$$$$
http://www.westmarine.com/webapp/wcs/st ... sNum=50683

Mine were getting rusty too,I used a HF cheap hand held  sandblaster and some play sand,sandblasted the struts and brackets [my brackets were not as bad as yours] and painted the struts and brackets with rustoleum "rust reformer primer" and several finish coats of rustoleum hammered black.Seems to be holding up well for 2 seasons now,a little spray lube on em every now and then will help also. :salut:
Never understood why they cheaped out on those,painted steel on an offshore boat?

pic added....
2003  Osprey 225
Palm Bay FL

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal