Attention: Have 2 pages to see today

Author Topic: 1994 Aquasport 250 explorer fuel tanks and switch positions  (Read 566 times)

November 08, 2012, 02:43:19 PM
Read 566 times

kb2ski

  • Information Offline
  • Posts: 18
1994 Aquasport 250 explorer fuel tanks and switch positions
« on: November 08, 2012, 02:43:19 PM »
A couple of easy questions for some of you that built these boats.  In this boat, is the tank level float switch (aft tank) for the Aux tank or the Main tank?  Also, I cannot quite figure on the console far right three-way swich for fuel guage. Is up position the  Aux fuel level and down position the Main fuel level?  

I may have it reversed but don't have a ohm meter to figure this out.  

Thanks.

November 09, 2012, 02:21:48 PM
Reply #1

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: 1994 Aquasport 250 explorer fuel tanks and switch posit
« Reply #1 on: November 09, 2012, 02:21:48 PM »
KB,
You'll need a meter to make sure.  Not too many folks on here have auxiliary tanks, so basically you have a 50/50 shot at being right...or wrong!

And what is this "float level" switch that you speak of?  I mean, I know the fuel level switch using one gauge to read 2 tanks, but float level switch? :scratch:  :scratch:


Corner of 520 and A1A...

November 10, 2012, 10:00:09 AM
Reply #2

GoneFission

  • Information Offline
  • Mechanical Master
  • Posts: 3479
Re: 1994 Aquasport 250 explorer fuel tanks and switch posit
« Reply #2 on: November 10, 2012, 10:00:09 AM »
KB - you need to get a meter!  You can get a good AC/DC meter pretty inexpensively these days - get one that does DC amps - something like this:

http://www.ebay.com/sch/i.html?_sacat=0 ... 03&_sop=15
Cap'n John
1980 22-2 CCP
Mercury 200 Optimax 
ASPA0345M80I
"Gone Fission"
ClassicAquasport Member #209


 


SimplePortal 2.3.5 © 2008-2012, SimplePortal