Author Topic: Peel and Stick Carbon Fiber (Read 1144 times)

kraw2 · « **on:** April 01, 2012, 03:06:36 PM »

Has anyone ever used peel and stick carbon fiber vinyl to cover an old gauge or switch panel? If so, how does it look and has it lasted any amount of time.

SaltWaterSniper · « **Reply #1 on:** April 05, 2012, 10:55:57 PM »

Yes I did my Panel on boat Carbon Fiber stick on, and it looked awesome for a few months. then it bubbled up and it looks like crap, dont do it. Paint it or something else. that stuff doesnt go well with saltwater and sun light.

Capt. Jarvis Nelson Osorio
www.SaltWaterSniper.com

ceejkay · « **Reply #2 on:** April 06, 2012, 12:11:14 AM »

i put it on the door handles of my old truck and looked like poo in about 6 months... i wouldnt recommend it.. if its a small enough there are plenty of people that can do a carbon fiber dip

wingtime · « **Reply #3 on:** April 06, 2012, 11:00:58 AM »

I have seen the vinyl graphics film that looks like carbon fiber. If it is a high end 3M stuff and it's put on right then it should hold up for a while. This stuff you see at the auto parts stores is junk and won't last.

ceejkay · « **Reply #4 on:** April 06, 2012, 02:08:03 PM »

how froggy are you feeling.. you can paint it to look like carbonfiber.. heres a little how to video

http://www.youtube.com/watch?v=Kv1MZ8WYklk

Author Topic: Peel and Stick Carbon Fiber (Read 1144 times)

kraw2

Peel and Stick Carbon Fiber

SaltWaterSniper

Re: Peel and Stick Carbon Fiber

ceejkay

Re: Peel and Stick Carbon Fiber

wingtime

Re: Peel and Stick Carbon Fiber

ceejkay

Re: Peel and Stick Carbon Fiber