Attention: Have only 1 page to see today

Author Topic: Stern oil filler cap  (Read 799 times)

December 27, 2011, 06:19:43 PM
Read 799 times

rucamana

  • Information Offline
  • Posts: 19
Stern oil filler cap
« on: December 27, 2011, 06:19:43 PM »
I like to sit in the back (stern/transom) section of the boat to fish but there is the oil filler cap and this other part (just removed this afternoon)


I leave the other corner for my uncle so he can fish and I take this other side but I like to be comfortable.
Is there any option for this oil filler cap?, I have seen some Aqua models with the oil cap mounted in the back with an opening but my best option will be a flush mount cap I think..
Ruben,
2000 Aquasport 225 Exp Tournament Master

December 27, 2011, 07:23:17 PM
Reply #1

flounderpounder225

  • Information Offline
  • Posts: 1497
Re: Stern oil filler cap
« Reply #1 on: December 27, 2011, 07:23:17 PM »
Ruben
This is my personal opinion, and may not be agreed with.  However... Every boat I have had with an external oil fill I have removed.  I don't trust them, too much chance to get water in the oil.  If it was mine, I would remove and put a nice stainless rod holder in there for trolling a shotgun line.  I buy bulk oil in my my 5 gallon bucket and fill with this http://www.harborfreight.com/catalogsea ... +pail+pump
Marc
1997 245 Osprey, 250 HPDI.  SOLD

December 27, 2011, 08:29:06 PM
Reply #2

pete

  • Information Offline
  • Posts: 1420
Re: Stern oil filler cap
« Reply #2 on: December 27, 2011, 08:29:06 PM »
I have this one,works fine

2003  Osprey 225
Palm Bay FL

December 27, 2011, 08:35:46 PM
Reply #3

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6445
Re: Stern oil filler cap
« Reply #3 on: December 27, 2011, 08:35:46 PM »
I'm no expert (and it will probably show) but the big black thing looks like the lower mount for a downrigger. :scratch:
Not really in the right spot with that transom but.....

As far as the oil fill, a flush mount (just like your fuel fill) could work.
Never gave the water a thought with either cap but water entry is possible and needs to be watched.
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

December 27, 2011, 08:42:10 PM
Reply #4

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: Stern oil filler cap
« Reply #4 on: December 27, 2011, 08:42:10 PM »
Quote from: "Capt. Bob"
I'm no expert (and it will probably show) but the big black thing looks like the lower mount for a downrigger. :scratch:
Not really in the right spot with that transom but.....

As far as the oil fill, a flush mount (just like your fuel fill) could work.
Never gave the water a thought with either cap but water entry is possible and needs to be watched.


It is a Penn Fathommaster 620 Swivel-matic downrigger mount.

December 27, 2011, 09:10:39 PM
Reply #5

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6445
Re: Stern oil filler cap
« Reply #5 on: December 27, 2011, 09:10:39 PM »
Quote from: "gran398"
Quote from: "Capt. Bob"
I'm no expert (and it will probably show) but the big black thing looks like the lower mount for a downrigger. :scratch:
Not really in the right spot with that transom but.....

As far as the oil fill, a flush mount (just like your fuel fill) could work.
Never gave the water a thought with either cap but water entry is possible and needs to be watched.


It is a Penn Fathommaster 620 Swivel-matic downrigger mount.

Does it have a compass in the stock? :wink:

Thanks Scott. :thumleft:
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

December 27, 2011, 09:13:50 PM
Reply #6

gran398

  • Information Offline
  • Purgatory
  • Posts: 7440
    • http://www.ascottrhodes.com
Re: Stern oil filler cap
« Reply #6 on: December 27, 2011, 09:13:50 PM »
:lol:

The compass is in the stock. I liked that :thumright:

That Trace....he's a fun guy :lol:

December 27, 2011, 11:21:07 PM
Reply #7

flounderpounder225

  • Information Offline
  • Posts: 1497
Re: Stern oil filler cap
« Reply #7 on: December 27, 2011, 11:21:07 PM »
Quote from: "pete"
I have this one,works fine


Now that I have learned my iPad photo bucket thing, here is what I was trying to show everyone, what I did where my oil fill was.  Rod holder
Marc
1997 245 Osprey, 250 HPDI.  SOLD

December 27, 2011, 11:22:47 PM
Reply #8

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Stern oil filler cap
« Reply #8 on: December 27, 2011, 11:22:47 PM »
Pete's was what I was going to suggest...


Corner of 520 and A1A...

December 27, 2011, 11:26:41 PM
Reply #9

seabob4

  • Information Offline
  • Rigging Master
  • Posts: 9087
Re: Stern oil filler cap
« Reply #9 on: December 27, 2011, 11:26:41 PM »
Quote from: "gran398"
:lol:

The compass is in the stock. I liked that :thumright:

That Trace....he's a fun guy :lol:




Corner of 520 and A1A...

December 29, 2011, 04:07:37 PM
Reply #10

rucamana

  • Information Offline
  • Posts: 19
Re: Stern oil filler cap
« Reply #10 on: December 29, 2011, 04:07:37 PM »
Thank you folks for your prompt response..
flounderpounder225, I share your idea to put in the rod holder and use the pail pump.
Pete's oil cap looks good like that, gives you a cleaner stern to sit down and fish...specially for yellow tails, :D ,

Will keep the downrigger mount for a "far away" future owner or maybe I will learn how to use and will install back on, I have all the trolling gears but never use cause I dont know how to :(

Does anyone knows where can I get a clear livewell box door cover, the PO used the door to cut the bait and it looks pretty bad..
Ruben,
2000 Aquasport 225 Exp Tournament Master

December 29, 2011, 07:12:40 PM
Reply #11

pete

  • Information Offline
  • Posts: 1420
Re: Stern oil filler cap
« Reply #11 on: December 29, 2011, 07:12:40 PM »
I'm sure a plastic fabricator or a glass shop could replicate you one or you could try sanding the original starboard one smooth :salut:
2003  Osprey 225
Palm Bay FL

December 29, 2011, 07:29:07 PM
Reply #12

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6445
Re: Stern oil filler cap
« Reply #12 on: December 29, 2011, 07:29:07 PM »
Quote from: "rucamana"
I like to sit in the back (stern/transom) section of the boat to fish but there is the oil filler cap

I leave the other corner for my uncle so he can fish and I take this other side but I like to be comfortable.
Is there any option for this oil filler cap?, I have seen some Aqua models with the oil cap mounted in the back with an opening but my best option will be a flush mount cap I think..

Why not then??

How about something like one of these to replace the existing one. Has to be easier on the bottom. Hopefully you can get one to fit the existing hole and fill hose.
http://www.iboats.com/Boat-Gas-Caps-Fue ... _id.238168
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

December 30, 2011, 10:21:18 AM
Reply #13

flounderpounder225

  • Information Offline
  • Posts: 1497
Re: Stern oil filler cap
« Reply #13 on: December 30, 2011, 10:21:18 AM »
Quote from: "rucamana"
Thank you folks for your prompt response..
flounderpounder225, I share your idea to put in the rod holder and use the pail pump.
Pete's oil cap looks good like that, gives you a cleaner stern to sit down and fish...specially for yellow tails, :D ,

Will keep the downrigger mount for a "far away" future owner or maybe I will learn how to use and will install back on, I have all the trolling gears but never use cause I dont know how to :(

Does anyone knows where can I get a clear livewell box door cover, the PO used the door to cut the bait and it looks pretty bad..

Ruben
If you don't want that cumbersome old downrigger mount hanging around and taking up space  :mrgreen: let me know.  I have two 625 fathom master downriggers and no mounts, I left them on my Chris craft when I sold her.  PM me if you are interested.  Thanks
Marc
1997 245 Osprey, 250 HPDI.  SOLD

 


SimplePortal 2.3.5 © 2008-2012, SimplePortal